ELE290225XGENG- -  -  N- KP, KPS -N- S- S- -27/02/2026- Prodotti Elettrici- - SN- N- - N-  - 875,550BbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE290225XG- N-Feb 26, 2031875550
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE290225XG - (ENG)
Certificate date 27/02/2026
Type Impianti di Automazione
Product Termostati

Model or Denomin.
Items
KP, KPS
Applicant DANFOSS A/S
Place of requester Nordborgvej 81%DK-6430 Nordborg (office E14-S1)%DENMARK
Tel. N.,Fax, Email 0045 7488 3404, 0045 74884000, Flemming_boss@danfoss.com
Standards RINA Rules for the Classification of Ships - Part C- Machinery, Systems and Fire Protection - Ch.3 , Sect. 8, Table 1
Expire date 26/02/2031
Head Office HAMBURG
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No.
ELE290225XG
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Temperature switches
Type KP, KPS
Applicant DANFOSS A/S
Nordborgvej 81
DK-6430 Nordborg (office E14-S1)
DENMARK
Reference standards RINA Rules for the Classification of Ships - Part C- Machinery, Systems and Fire Protection - Ch.3 , Sect. 8, Table 1
  

 
 
   .   This Certificate is valid until February 26, 2031
_________________________________
RINA Services S.p.A.
Cinar Kutlar
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No.
ELE290225XG
Enclosure - Page 1 of 2
KP, KPS
Product Description

The KP Thermostats are single-pole, double-throw (SPDT) temperature-operated electric switches.


They can be connected directly to a single-phase AC motor of up to approx. 2 kW or installed in the control circuit of DC motors and large AC motors.
The KP Thermostats are used for regulation but can also be seen in safety monitoring systems.
They are available with vapour charge or with adsorption charge. With vapour charge the differential is very small. The KP Thermostats with adsorption charge are widely used to give frost protection.

Main characteristics Thermostat KP:

Ambient temperature: -40°C ... +65°C (80°C for max. 2 hours)


Switch: Single-pole, double-throw (SPDT) changeover switch
Contact load: Alternating cur. AC1&AC3=16 A, 400 V / Direct cur. DC13: 12 W, 220 V control current
Tightening torque: max. 2 Nm
Rated impulse voltage: 4 kV
Pollution degree: 3
Short circuit protection, fuse: 16 A
Insulation: 400 V
Enclosure: IP30 / IP44

Standard Thermostat Type KP:

Type
Bulb Type
Regulating Range
Differential Dt Lowest T.
Differential Dt Highest T.
Capillary tube L.
KP61
A
-30 - 15°C
5.5 - 23°C
1.5 - 7°C
2m
KP61
A
-30 - 15°C
5.5 - 23°C
1.5 - 7°C
5m
KP61
B
-30 - 13°C
4.5 - 23°C
1.2 - 7°C
2m
KP61
B
-30 - 15°C
5.5 - 23°C
1.5 - 7°C
2m
KP61
A
-30 - 15°C
Fixed 6°C
Fixed 2°C
5m
KP61
B
-30 - 15°C
Fixed 6°C
Fixed 2°C
2m
KP62
C1
-30 - 15°C
6.0 - 23°C
1.5 - 7°C
-
KP63
A
-50 - 10°C
10.0 - 70°C
2.7 - 8°C
2m
KP63
B
-50 - 10°C
10.0 - 70°C
2.7 - 8°C
2m
KP68
C1
-5 - 35°C
4.5 - 25°C
1.8 - 7°C
-
KP69
B
-5 - 35°C
4.5 - 25°C
1.8 - 7°C
2m
KP62
C2
-30 - 15°C
5.0 - 20°C
2.0 - 8°C
-
KP71
E2
-5 - 20°C
3.0 - 10°C
2.2 - 9°C
2m
KP71
E2
-5 - 20°C
Fixed 3°C
Fixed 3°C
2m
KP73
E1
-25 - 15°C
12.0 - 70°C
8.0 - 25°C
2m
KP73
D1
-25 - 15°C
4.0 - 10°C
3.5 - 9°C
2m
KP73
D1
-25 - 15°C
Fixed 3.5°C
Fixed 3.5°C
2m
KP73
D2
-20 - 15°C
4.0 - 15°C
2.0 - 13°C
3m
KP73
D1
-25 - 15°C
3.5 - 20°C
3.25 - 18°C
2m
KP75
F
0 - 35°C
3.5 - 16°C
2.5 - 12°C
2m
KP75
E2
0 - 35°C
3.5 - 16°C
2.5 - 12°C
2m
KP77
E3
20 - 60°C
3.5 - 10°C
3.5 - 10°C
2m
KP77
E3
20 - 60°C
3.5 - 10°C
3.5 - 10°C
3m
KP77
E2
20 - 60°C
3.5 - 10°C
3.5 - 10°C
5m
KP78
D1
30 - 90°C
5.0 - 15°C
5.0 - 15°C
2m
KP79
E3
50 - 100°C
5.0 - 15°C
5.0 - 15°C
2m
KP81
E3
80 - 150°C
7.0 - 20°C
7.0 - 20°C
2m
KP81
E3
80 - 150°C
Fixed 8°C
Fixed 8°C
2m
KP98
E2
OIL:60 – 120°C
OIL: Fixed 14°C
OIL: Fixed 14°C
1m
KP98
E2
HT: 100 – 180°C
HT: Fixed 25°C
HT: Fixed 25°C
2m

Product Description

The KPS Series consists of a series of pressure and temperature-controlled switches. In this series, special attention has been given to meeting demands for a high level of enclosure, robust and compact construction, and resistance to shock and vibration.


For KPS thermostats the position of the contacts depends on the temperature of the sensor and the set scale value.
The series covers most outdoor as well as indoor application requirements and is suitable for use in monitoring alarm and control systems in factories, diesel plants, compressors, power stations and on-board ships.

Main characteristics KPS Thermostats:

Switch: Single-pole changeover (SPDT)


Contact material: Gold-plated silver contact
Contact load AC: Ohmic=10 A, 440 V, AC-1 / Inductive=6A, 440V, AC-3 & Inductive= 4A, 440V, AC-15
Contact load DC: 12 W, 220 V, DC-13
Ambient temperature: -40°C ... +70°C
Vibration resistance: Vibration-stable in the range 2 – 30 Hz, amplitude 1.1 mm og 30 – 300 Hz, 4 G.
Enclosure: IP67
Cable entry: Cable diameters from 5 – 14 mm.
Identification: The type designation and code no. of the unit is stamped in the side of the housing.


Standard Thermostat Type KPS:

Type
Setting Range
Mech. diff. adjust-able/fixed
Max. Sensor Temp.
Sensor Pocket
Capillary tube L.
KPS76
-10 - 30°C
3 - 10°C
80°C
65/75/110/160mm
2m
KPS77
20 - 60°C
3 - 14°C
130°C
65/75/110/160mm
-/2/5m
KPS79
50 - 100°C
4 - 16°C
200°C
65/75/110/160mm
-/2/3/5/8m
KPS80
70 - 120°C
4.5 - 18°C
220°C
65/75/110/160mm
-/2/3/5/8m
KPS81
60 - 150°C
5 - 25°C
250°C
65/75/110/160/200mm
-/2/5/8m
KPS83
100 - 200°C
6.5 - 30°C
300°C
65/75/110/160mm
2m
KPS83
100 - 200°C
18°C
300°C
65/75/110/160mm
2m

Documents:

Product Specification Document of KP - AI203586420959en-000801 dated 2021.03


Product Specification Document of KPS - AI227086438792en-001102 dated 2025.07
Product Specification Document - AI000086439001en-001101 dated 2025.02
Declaration of Conformity dated 12.06.2025

This certificate replaces the previous certificate ELE086320XG/001.

HAMBURG February 27, 2026
**** NOTICE: This is NOT an official certificate ****