|
RCD II - D3 - (Modulo A1 - Rapporto di visita) |
|
BIL |
|
Dettaglio |
|
|
|
|
 |
RAPPORTO DI VISITA
EXAMINATION REPORTN. DIP068017CA
|
Il RINA, in qualità di organismo notificato (n° 0474), ha verificato l' esecuzione degli accertamenti tecnici in relazione ai requisiti essenziali di sicurezza 3.2 (stabilità e bordo libero) e 3.3 (galleggiabilità) stabiliti dalla Direttiva 2013/53/UE per il seguente modello di unità da diporto.
RINA as notified body (no. 0474), verified the technical ascertaiment relevant to the essential safety requirements 3.2 (stability and freebord) and 3.3 (buoyancy and flotation) of Directive 2013/53/EU for the following model of recreational craft.
|
| Descrizione |
UNITA' DA DIPORTO |
| Description |
RECREATIONAL CRAFT |
| Tipo |
BS 100 FB |
| Type |
|
| Norme di riferimento |
Direttiva Europea 2013/53/UE - Norme per la Certificazione CE delle Imbarcazioni da Diporto e relativi Componenti, moto d'acqua, emissione sonore ed emissioni allo scarico dei motori di propulsione. |
| Reference standards |
European Directive 2013/53/EU - Rules for EC certification of recreational craft and their components, personal watercraft, noise emissions from recreational craft and exhaust emissions from propulsion engines. |
|
|
|
|
|
|
|
|
|
|
|
Questo documento è stato emesso su base volontaria ad integrazione del rapporto di visita ufficiale. In esito ai risultati ottenuti ed indicati nel rapporto di visita ed in base agli Articoli 16, 17 e 18 della Direttiva 2013/53/UE il Fabbricante è autorizzato ad apporre sul prodotto sopradescritto la seguente marcatura.
|
This document has been issued on a volutary basis as an integration of the official examination report. Following the results obtained and indicated in the examination report and on the basis of Articles 16, 17 and 18 of Directive 2013/53/EU, the Manufacturer is authorized to affix the following marking to the product described above.
|
|
|
|
|
_________________________________
RINA Services S.p.A.
|
| |
Alberto Carmagnani
|
| Rilasciato a Genova l' 11 Maggio 2018 |
| .
|
| Issued in Genoa on May 11, 2018 |
| |
|
|
|
|
|
|
|
|
|
Questo documento e' composto di 1 pagina e di 1 allegato |
|
This document consists of this page and 1 enclosure |
Termini e condizioni di validità/Terms and validity
conditions
- Il presente certificato potrà perdere validità nel
caso siano apportate modifiche al prodotto rispetto
alla documentazione tecnica esaminata.
- The following condition may render this
certificate invalid: any technical modification to
the product as regards examined technical
documentation
|
Termini e condizioni di validità
La responsabilità del prodotto rimane del
fabbricante, del suo rappresentante o, in assenza di
un rappresentante, dell'importatore, in accordo con
la Direttiva 2001/95/EC relativa alla Sicurezza
Generale dei Prodotti. Le seguenti condizioni
possono rendere non valido il presente <Computed
Value>: modifiche nella realizzazione del
prodotto, rispetto alla documentazione tecnica
esaminata modifiche o emendamenti alla Direttiva
modifiche o emendamenti negli standard che
costituiscono la base per la conformità documentale
con i requisiti essenziali della Direttiva.
|
Terms and validity conditions
The product liability rests with the manufacturer, his
representative or, in the absence of a representative,
the importer, in accordance with the General Product
Safety Directive 2001/95/EC The following conditions may
render this <Computed Value> invalid: Changes in
construction of the product as regards the examined
technical file Changes or amendaments to the Directive
Changes or amendaments in the standards with form basis
for documenting compliance with the essential
requirements of the Directive. |
|
**** NOTICE: This is NOT an official certificate **** |
|
|