MED230525PUENG- -  -  N-  HY-PLD-TA -N- S- S- -13/01/2026- Marine Equipment- - NN- S- - N-  - 54,357B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED230525PU- N-Jan 13, 203154357
 
Form
  Marine Equipment(TO)
Certification N. MED230525PU - (ENG)
Certificate date 13/01/2026
Type Apparecchi di navigazione
Product Pilot ladder
Item Nº MED/4.49
USCG Category N° 163.003

Model or Denomin.
Items
HY-PLD-TA
Applicant HAN YOUNG ENTERPRISE LTD.
Place of requester 206, Haeyang-ro, Yeongdo-gu  %  49012 Busan  % REPUBLIC OF KOREA
Tel. N.,Fax, Email +82 51 403 4787, +82 51 404 1952, jkchun@han-young.com
Directive (EU) 2025/1533
Standards IMO Res A.1045 (27),as amended, ISO 799-1:2019.
Reference Documents Reg. V/23, X/3, of SOLAS 74 Convention as amended,IMO Res. A.1045(27), IMO MSC/Circ.1428
Expire date 13/01/2031
Head Office BUSAN
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Jin Young Kim S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED230525PU

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Navigation Equipment requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/4.49
USCG Category Nº 163.003
Description Pilot ladder
Type HY-PLD-TA
Applicant HAN YOUNG ENTERPRISE LTD.
206, Haeyang-ro, Yeongdo-gu,49012 Busan,REPUBLIC OF KOREA
Testing standards IMO Res A.1045 (27),as amended, ISO 799-1:2019.
Reference standards Reg. V/23, X/3, of SOLAS 74 Convention as amended; IMO Res. A.1045(27), IMO MSC/Circ.1428
Issued in BUSAN on
This Certificate is valid until
January 14, 2026
January 13, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Jin Young Kim
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED230525PU
Page 1 of 3


Product Description

'HY-PLD-TA' is used for pilot ladder assembled with side ropes continuous from the top to the bottom of the ladder on each side.
Max. Length of ladder
25 m
Step pitch
330 ± 20 mm
Securing rope (if used)
Min. 3 m
Polyester rope with a polypropylene core / Dia.: 28 mm / Breaking strength: ≥ 48 kN
(Manufacturer: Xiamen Lonako Inc.)
Side rope
Polyester rope with a polypropylene core / Dia.: 22 mm / Breaking strength: ≥ 24 kN
(Manufacturer: Xiamen Lonako Inc.)
Step
Thermoplastic composite material / 528 mm × 117 mm × 30 mm
(Manufacturer: Xiamen Lonako Inc.)
Spreader step
Thermoplastic composite material / 1805 mm × 116 mm × 30.5 mm
(Manufacturer: Xiamen Lonako Inc.)
Rubber step
Rubber with internal steel frame / 533 mm × 118 mm × 60.5 mm
(Manufacturer: Xiamen Lonako Inc.)








ATTACHMENT TO
CERTIFICATE No. MED200625PU
Page 2 of 3
Technical Documentation
  • Technical drawings and Manual, filed by RINA listed on Letter No. PUFP/2026/14/YK008.
Tests Carried Out
  • Test report of Aluminum Buckle (Ref. No. L25-WT1879ETA), issued by Foshan Supervision Testing Center of Quality and Metrology dated on 22-07-2025, filed by RINA with No. PUFP-8094.
  • Test report of LNK-LRP22 Rope (Ref. No.GL24110372E), issued by The Quality Supervision and Inspection Center of Synthetic Material Ageing of Chemical Industry dated on 09-12-2024, filed by RINA with No. PUFP-8096.
  • Test report of LNK-LRP28 Rope (Ref. No.GL24110371E), issued by The Quality Supervision and Inspection Center of Synthetic Material Ageing of Chemical Industry dated on 04-12-2024, filed by RINA with No. PUFP-8097.
  • Test report of LNKMT-LDS1 Step (Ref. No.202101MTLDS1), issued by Xiamen Lonako Material Technology Co., Ltd. dated on 25-01-2021, witnessed by RINA dated from 19-01-2020 to 25-01-2021 and filed by RINA with No. PUFP-8099.
  • Type Examination Test Report for LNK-PLD-TA, witnessed by RINA dated on 12-09-2025 and filed by RINA with No. PUFP-8098.
  • Type Examination Test Report for HY-PLD-TA, witnessed by RINA dated on 10-12-2025 and filed by RINA with No. PUFP-8095.
  • Application/Limitation

    • This certificate does only consider the pilot ladder and not the installation arrangement. Installation is to be approved on-board. Handholds shall be provided to ensure a safe passage from the deck to the head of the ladder and vice versa.
    • If used, each securing rope for both side shall be of equal length and shall be a minimum length of 3 m.
    • Each part of a ladder shall be free of splinters, burrs, sharp edges, corners, projections, or other defects that can injure a person using the ladder.
    • Instructions for installation, use and maintenance are to be available in the ship’s official language.
    • Product shall be permanently marked in accordance with ISO 799-1:2019, Sec. 7 and 8.

    Notes
    • None.




    ATTACHMENT TO
    CERTIFICATE No. MED230525PU
    Pages 3 of 3
    The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
    XXXX/YY
    "WHEELMARK FORMAT"

    XXXX
    Notified Body number undertaking surveillance module
    YY
    Last two digits of year mark affixed
         
    ______________________________________________
    General conditions for the approval
    a) The initial conditions verified by RINA at the time of the approval are to be maintained
    b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
    c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
    d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
    e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

    f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


    __________________________________________
    Jin Young Kim
    **** NOTICE: This is NOT an official certificate ****