FAB097126PUENG
-
- -
N
-
Grey and nodular iron castings
-
N
-
S
-
S
-
-
28/04/2026
-
Fabbricanti Approvati
-
-
N
N
-
N
-
-
S
- -
1,081,390
B
bis
Fabbricanti Approvati
Numero Pratica,NumDich,Norma,Schema,Richiesta,Validità
-
FAB097126PU
-
N
-
Jul 1, 2029
1081390
Print Page
Form
Fabbricanti Approvati
(
TO
)
Certification N.
FAB097126PU
- (
ENG
)
Certificate date
28/04/2026
Type
Approvazione di fabbricanti di materiali
Product
Fusi in ghisa
Model or Denomin.
Items
Grey and nodular iron castings
Applicant
SAMYOUNG CASCO CO., LTD.
View Certificate
Place of requester
24 3sandan 1-gil, Buk-myeon % 56137 Jeongeup-Si (Jeollabuk-do) % REPUBLIC OF KOREA
Tel. N.,Fax, Email
+82 63 570 6069, ---, ---
Standards
RINA Rules for the approval of manufacturers of materials
Expire date
01/07/2029
Responsible Office
BUSAN
Codice scelto:
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
Lingua certificato:
ENG
Sotto modulo:
Vuoto
Fase:
Querysave
Firma:
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No.
FAB097126PU
This is to certify
that the manufacture of the product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval of Manufacturers of Materials.
Description
Iron castings
Type
Grey and nodular iron castings
Reference standards
RINA Rules for the approval of manufacturers of materials
.
This Certificate is valid until
July 1, 2029
_________________________________
RINA Services S.p.A.
Jong Min Lee
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****
FAB097126PU
Enclosure - Page 1 of 1
Grey and nodular iron castings
APPROVAL CONDITIONS
-The chemical composition and the mechanical properties are to be in accordance with the RINA
requirements or equivalent recognized standards.
- Iron types: - Grey Cast Iron with minimum tensile strength not higher than 300 N/mm2
- Nodular Cast Iron with minimum tensile strength not higher than 450 N/mm2
- Products max. weight: Grey Cast Iron 50,000 kg , Nodular Cast Iron 35,000 kg
- Survey conditions: all casting to be used for construction of ships and machinery classed with RINA
shall meet the requirements of the RINA Rules and shall be tested accordingly.
General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.
BUSAN April 28, 2026
**** NOTICE: This is NOT an official certificate ****