MED328624CS!002ENG- -  -  N- PULLMAN BED_DW -N- S- S- -16/12/2025- Marine Equipment- - SN- S- - N-  - 254,401B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED328624CS/002- N-Jan 16, 2030254401
 
Form
  Marine Equipment(TO)
Certification N. MED328624CS/002 - (ENG)
Certificate date 16/12/2025
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.110

Model
Items/Sizes
PULLMAN BED_DW
Applicant DE WAVE S.R.L.
Place of requester VIA DE MARINI 1  %  16149 Genova (GE)  % ITALY
Tel. N.,Fax, Email 010640201, 01064020999, ---
Directive (EU) 2025/1533
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3.4,IMO Circ. MSC.1 1120,SOLAS 74 Reg. II-2/9,IMO Circ. MSC.1 1581
Request 16/12/2025
Validity 16/01/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED328624CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.110
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type PULLMAN BED_DW
Applicant DE WAVE S.R.L.
VIA DE MARINI 1,16149 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3.4; IMO Circ. MSC.1 1120; SOLAS 74 Reg. II-2/9; IMO Circ. MSC.1 1581
Issued in Genoa on
This Certificate is valid until
December 16, 2025
January 16, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED328624CS/002
Page 1 of 2

Product description

Ceiling named DEM C5 certified by RINA, on B-15 Class, with Certificate No. MED188923CS/001 dated 11/09/2023, fitted below the deck plating, at 400 mm. The ceiling is fitted with a parallelepiped steel box having dimensions of 974x2186 mm and height of 221.5 mm including a retractable bed. The box is composed of a steel sheet, 1.5 mm thick, and is insulated, on the outside, by means of one layer of mineral wool type ISOVER Ultimate SeaProtect Slab 66; 30 mm thick and density of 66 kg/m3. The mineral wool is fixed to the steel box by means of steel pins and washers. The box is suspended to the deck stiffeners by means of four tie rods having diameter of 10 mm and metallic profiles having dimensions of 100x50 mm. The box is fitted, on the perimeter, with a steel profile 3 mm thick, that make the closure with the ceiling panels. The bed is hinged to the closing hatch that is composed of steel sheet having thickness of 1.5 mm and fitted with a system closure, that acts on two points, actuated by a square key.

The ceiling may also be produced by:
- Inoxking srl - via Cal Longa 22 - 31028 Vazzola (TV) Italy
- Nova Stampaggi snc - via Agnelli 3 - Z.A. Villotta - 33083 Pordenone (PN) Italy
- Metaldesi srl - via Ermanno Casoli 4 - 60044 Fabriano (AN) Italy

Fields of application
Fire resistant B-15 Class ceiling with accessories.

Reference documents
DE WAVE drawing No. C9999/AA/1679 Rev.2 dated 12 December 2024 enclosed on Test Report No.2024CS013286/3 dated 20 December 2024.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2024CS013286/3 issued on 12 December 2024 according to IMO 2010 FTP CODE Part 3 Annex 1.

This certificate annuls and replaces the certificate No. MED328624CS/001 dated 20/01/2025 due to reissuance.




ATTACHMENT TO
CERTIFICATE No. MED328624CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****