ENGGN30/06/2025
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED080625VE/001
Certificate date 6/30/25
Type Prevenzione dell'inquinamento marino
Directive (EU) 2024/1975
Product Sistemi di trattamento dei gas di scarico a bordo
Item Nº MED/2.10
Model ECO-EGC™ DeSOx OPEN LOOP System
Identification 23-1819-MAR-SC-100 [ME 1 sn XAAD613971 of IMO 1022641]
23-1819-MAR-SC-200 [ME 2 sn XAAD613974 of IMO 1022641]
Applicant CANTIERE NAVALE VISENTINI S.R.L.
Place of requester VIALE VENEZIA 1  %  30015 Frazione Sottomarina - Chioggia (VE)  % ITALY
Tel. N.,Fax, Email 0426 320700, 0426 320703, tecnicocnv@visentinigroup.com
Standards IMO Res. MEPC.340(77)
Surveyor Daniele Pilleri
Responsible Office RINA Venice Marine



UNIT VERIFICATION CONFORMITY (MODULE G)
CERTIFICATE No.  MED080625VE/001

This is to certify
that RINA Services S.p.A. did undertake the relevant conformity assessment procedures for the equipment of the manufacturer identified below, which was found to be in compliance with the Marine-Pollution prevention requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of (EU) 2024/1975.
MED Item Nº MED/2.10
Description On board exhaust gas cleaning systems
Type ECO-EGC™ DeSOx OPEN LOOP System
Identification 23-1819-MAR-SC-100 [ME 1 sn XAAD613971 of IMO 1022641]
23-1819-MAR-SC-200 [ME 2 sn XAAD613974 of IMO 1022641]
Applicant CANTIERE NAVALE VISENTINI S.R.L.
VIALE VENEZIA 1
30015 Frazione Sottomarina - Chioggia (VE)
ITALY
Testing standards IMO Res. MEPC.340(77)
    
Issued in Venice, ITALY 
on June 30, 2025

This Certificate consists of this sheet plus an attachment
This certificate authorises the Manufacturer or his authorised representative established within the Community to affix the following symbol on the equipment above identified.
0474 /25
 

________________________________________
Lino Ballarin
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE No. MED080625VE/001
Place of unit verification
Chioggia, ITALY,,

Verified components of the equipment (with serial number)
23-1819-MAR-SC-100 [ME 1 sn XAAD613971 of IMO 1022641]
23-1819-MAR-SC-200 [ME 2 sn XAAD613974 of IMO 1022641]
Technical documentation


PRMT-23250 approved on 11 April 2025 - exhaust gas cooling system
PRMT-23251 approved on 11 April 2025 - main pumps
PRMT-23252 approved on 11 April 2025 - desox DG#1-2
PRMT-23253 approved on 11 April 2025 - water analysis rack 1
PRMT-23254 approved on 11 April 2025 - water analysis rack 2+3
PRMT-23255 approved on 11 April 2025 - water analysis rack 4
approval letter PRMT/2025/69/RSPTZ


PPVT-48162 approved on 04 April 2025 - CN Visentini Record Book
PPVT-48163 approved on 04 April 2025 - CN Visentini C236 ETM-B
PPVT-48164 approved on 04 April 2025 - CN Visentini C236 OMM
PPVT-48165 approved on 04 April 2025 - CN Visentini C236 SECP
approval letter PPVT/2025/309/RSPTZ


--------------


ECO-ECG System DeSOx consisting of the verified components listed in "EGCS - TECHNICAL MANUAL – SCHEME B" approved with RINA No. PPVT-48163.


--------------


Tests carried out:
EGCS Survey Report No. Visentini_C236_EGCS TEST REPORT relevant to tests carried out on 08/05/2025
Analysis Report relevant to tests No. VE25-00289_0 dated 23/05/2025.


Limitation on the acceptance or use of the product
1-In scheme B, according to MEPC.340(77), compliance with emission requirements is demonstrated by continuous exhaust gas monitoring. 2-EGCS acceptance and use to be within the terms and conditions of “Procedure for Compliance” at Para. 6 of PPVT-48165 approved on 04 April 2025 - CN Visentini C236 SECP" . 3-Monitoring system is subject to periodic surveys by RINA according to MEPC.340(77). 4-This certificate is issued on the basis of test carried out while main engines running only on fuel with maximum content of sulfur not greater than 1,20% at 85% MCR. 5-This certificates annuls and replaces previously issued certicates n. MED065223VE and MED080625VE.
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
Lino Ballarin
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****