MED207025PUENG- -  -  N-  HLB-NM52FC / HLB-NM52FF -N- S- S- -25/05/2026- Marine Equipment- - NN- S- - N-  - 201,222B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED207025PU- N-May 25, 2031201222
 
Form
  Marine Equipment(TO)
Certification N. MED207025PU - (ENG)
Certificate date 25/05/2026
Type Mezzi di salvataggio
Product Lifeboats: (b) free-fall lifeboats
Item Nº MED/1.17b

Model or Denomin.
Items
HLB-NM52FC / HLB-NM52FF
Applicant HLBENG CO., LTD.
Place of requester 216-53 Dangwol-ro, Onsan-eup, Ulju-gun,  %  45011 Ulsan  % REPUBLIC OF KOREA
Tel. N.,Fax, Email +82 52 256 9442, ---, mong11@hlb-eng.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102), IMO MSC/Circ.1006.
Reference Documents SOLAS 74 Reg.III/21, SOLAS 74 Reg.III/31, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) IV, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC.1/Circ.1423, IMO MSC.1/Circ.1630 Rev 2.
Expire date 25/05/2031
Head Office RINA Korea Marine
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Jin Young Kim S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED207025PU

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.17b
Description Lifeboats: (b) free-fall lifeboats
Type HLB-NM52FC / HLB-NM52FF
Applicant HLBENG CO., LTD.
216-53 Dangwol-ro, Onsan-eup, Ulju-gun,,45011 Ulsan,REPUBLIC OF KOREA
Testing standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102), IMO MSC/Circ.1006.
Reference standards SOLAS 74 Reg.III/21, SOLAS 74 Reg.III/31, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) IV, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC.1/Circ.1423, IMO MSC.1/Circ.1630 Rev 2.
Issued in RINA Korea Marine on
This Certificate is valid until
May 26, 2026
May 25, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Jin Young Kim
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED207025PU
Page 1 of 3


Product Description

  • HLB-NM52FC : Totally enclosed free-fall lifeboat
  • HLB-NM52FF : Totally enclosed free-fall lifeboat, Equipped with self-contained air support system and water spray system
  • Length x Breadth x Depth
    5.20 m x 2.50 m x 0.90 m
    Hull material (G.R.P) Resin
    TM-107M (Manufacturer: Changzhou Huari New Material Co., Ltd.)
    Mat
    EMC300, EMC450 (Manufacturer: Changzhou Tiama Group Co., Ltd.)
    Roving
    EWR600 (Manufacturer: Changzhou Tiama Group Co., Ltd.)
    Type of release mechanism(s)
    RH50F (SWL: 50 kN)
    (Manufacturer: Ningbo New Marine Lifesaving Equipment Co., Ltd.)
    Propulsion type
    Inboard marine diesel engine
    Minimum speed
    ≥ 6 Knots
    Type of boat
    HLB-NM52FC
    HLB-NM52FF
    Light load (fully equipped)
    2,615 kg
    2,955 kg
    Carrying capacity (Person)
    20 P
    20 P
    Full load (82.5 kg/Person)
    4,265 kg
    4,605 kg
    Bollard pull force
    2,800 N (Max) / Engine model: 380J-3
    (Manufacturer: Zhenjian Siyang Diesel Engine Manufacturing Co.Ltd)
    2,350 N (Max) / Engine model: DV29RME
    (Manufacturer: BUKH A/S)
    Free-fall height (Max.)
    16 m
    Launching ramp length (Min.)
    7.0 m
    Launching ramp angle
    30°
    Launching condition
    Trim ≤ 10°, List ≤ 20°



ATTACHMENT TO
CERTIFICATE No. MED207025PU
Page 2 of 3
Technical Documentation
  • Technical drawings and Manual, filed by RINA listed on Letter No. PUFP/2026/222/YK008
Tests Carried Out
  • Test report of Fire-retardant & Flame-resistant test materials (Ref. No. 2023-03-M001), issued by Shanghai R&D Center for Polymer material dated on 21-04-2023, filed by RINA with No. PUFP-8529.
  • Test report of Fire test (Ref. No. S150-XHS-01-2007), issued by The Marine Environment Engineering and Reliability Laboratory of NO.704 Research Institute of CSIC dated on 12-07-2007, witnessed by BV and filed by RINA with No. PUFP-8530.
  • Test report of Free-fall test (Ref. No. S112A-XPL(1)-2023 & S112A-XPL(2)-2023), issued by The Marine Environment Engineering and Reliability Laboratory of NO.704 Research Institute of CSSC dated on 22-02-2023, filed by RINA with No. PUFP-8531.
  • Evaluation and test report (Ref No. NM52-2023-01), witnessed by CCS dated from 10-02-2023 to 22-03-2023, filed by RINA with No. PUFP-8527.
  • Evaluation and test report (Ref No. NM52-2025-01), witnessed by KR dated on 09-01-2025, filed by RINA with No. PUFP-8528.
  • Application/Limitation

    • Lifeboat equipment and marking/instructions are to be inspected after installation onboard the ship.
    • Production and installation testing shall be carried out according to IMO Res.MSC.81(70), part 2 as amended.
    • The launching appliance that satisfying the free-fall characteristics should be used for this product.
    • Instructions for installation, use and maintenance are to be available in the ship’s official language.
    • Listed in Marine Equipment Directive such as Engine, Release mechanism and all the equipment supplied with this boat shall be certified according to the provisions of current revision of Marine Equipment Directive.
    • Product shall be permanently marked with as follows in accordance with the LSA Code, item 4.4.1.2.

    Notes
    • None.








    ATTACHMENT TO
    CERTIFICATE No. MED207025PU
    Pages 3 of 3
    The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
    XXXX/YY
    "WHEELMARK FORMAT"

    XXXX
    Notified Body number undertaking surveillance module
    YY
    Last two digits of year mark affixed
         
    ______________________________________________
    General conditions for the approval
    a) The initial conditions verified by RINA at the time of the approval are to be maintained
    b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
    c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
    d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
    e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

    f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


    __________________________________________
    Jin Young Kim
    **** NOTICE: This is NOT an official certificate ****