ENGGS03/09/2009
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED070709SH/001
Certificate date 9/3/09
Type Mezzi di salvataggio
Directive 2002/75/EC
Product Dispositivi di messa a mare per imbarcazioni di salvataggio a caduta libera
Item Nº A.1/1.23
Model 55KN
Identification G09007
Manufacturer SHEYANG VICTOR MARINE AUXILIARIES CO., LTD.
Tel. N.,Fax, Email +86 515 82387188, +86 515 82387388, ---
Place of production NO. 9, HEDE ROAD, HEDE INDUSTRY GARDEN, SHEYANG, JIANGSU  %  224300 SHEYANG  % CHINA
Tel. N.,Fax, Email +86 515 82387188, +86 515 82387388, ---
Applicant SHEYANG VICTOR MARINE AUXILIARIES CO., LTD.
Place of requester NO. 9, HEDE ROAD, HEDE INDUSTRY GARDEN, SHEYANG, JIANGSU  %  224300 SHEYANG  % CHINA
Tel. N.,Fax, Email +86 515 82387188, +86 515 82387388, ---
Standards MSC.81(70) and Res MSC.48(66) LSA Code
Surveyor Hong Gu
Head Office SHANGHAI



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED070709SH/001

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/1.23
Description Launching appliances for free-fall lifeboats
Model 55KN
Identification G09007
Applicant SHEYANG VICTOR MARINE AUXILIARIES CO., LTD.
NO. 9, HEDE ROAD, HEDE INDUSTRY GARDEN, SHEYANG, JIANGSU
224300 SHEYANG
CHINA
Testing standards MSC.81(70) and Res MSC.48(66) LSA Code
    
Issued at Genoa 
on September 3, 2009

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /09
 

________________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED070709SH/001
Manufacturer:
SHEYANG VICTOR MARINE AUXILIARIES CO., LTD.
Address
NO. 9, HEDE ROAD, HEDE INDUSTRY GARDEN, SHEYANG, JIANGSU
224300 SHEYANG
CHINA

Verified components of the equipment (with serial number)
G09007
Technical documentation
Test report issued by RINA on August 22, 2009 ( n. G09007) in accordance with Resolution MSC. 81(70) and MSC.48(66) LSA Code.


Drawing No.:  PUST0002653  approved by Rina dated 22/08/2009
 


Product description:
Lenght of ramp: 6.572 meters.
Breadth: 2.53 meters
Safety working Laoad: 55 kn
Angle of ramp: 35 deg

   


           ATTACHMENT TO CERTIFICATE No. MED070709SH/001


Capacity of drum: 45 meter
Steel wire diameter: 18 x 19+FC, 18mm.
Hydraulic system working pressure: 19.5 Mpa
Hydraulic system safety valve setting pressure: 21Mpa
Type of motor: Y160L-4-H manufactured by Yancheng Jin YongDa Electrical Engineering Manufacture Works Co., Ltd
Winch braking test load: 82.5kn
Recovery test load: 42kn
Dynamic test load: 60.5kn
Static test load: 121kn
Minimum launching load: 26kn

Limitation on the acceptance or use of the product
Allowable working inclination: Trim: 10 deg list: 20 deg
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****