FAB021326CF!001ENG- -  -  N- GRADES A,B,D, AH32, DH32, AH36, DH36 -N- S- S- -15/05/2026- Fabbricanti Approvati- - SN- N- - S-  - 0BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB021326CF/001- N-Oct 8, 20290
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB021326CF/001 - (ENG)
Certificate date 15/05/2026
Type Approvazione di fabbricanti di materiali
Product Lamiere da scafo in acciaio ordinario e ad elevata resistenza

Model or Denomin.
Items
GRADES A,B,D, AH32, DH32, AH36, DH36
Applicant Jindal Steel Limited
Place of requester JINDAL STEEL LIMITED % Post Box No. 16, Kharsia Road, Raigarh 496001 (C.G), India 496001 Raigarh (Chhattisgarh 22)
Tel. N.,Fax, Email ---, ---, ---
Standards RINA Rules for the approval of manufacturers of materials
Reference Documents RINA Rules
Expire date 08/10/2029
Responsible Office RINA India Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB008526CF
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Normal strength and higher strength hull steel plates
Type GRADES A,B,D, AH32, DH32, AH36, DH36
Applicant Jindal Steel Limited
JINDAL STEEL LIMITED
Post Box No. 16, Kharsia Road, Raigarh 496001 (C.G), India 496001 Raigarh (Chhattisgarh 22)
Reference standards RINA Rules for the approval of manufacturers of materials
Reference documents RINA Rules
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until October 8, 2029
_________________________________
RINA Services S.p.A.
Sumit Kumar Paul
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB008526CF
Enclosure - Page 1 of 1
GRADES A,B,D, AH32, DH32, AH36, DH36

APPROVAL CONDITIONS



Steel making : NOF New Oxygen Furnace – EAF Electric arc furnace

Casting process: CC Continuous casting - SC Slab Caster

Deoxidation practice, condition of supply and thickness:

Steel grades
Deoxidation practice and fine grained elements
Condition of supply and max. thickness
Normal Strength (A,B,D)
Al
AR, TM, N, NR
Max. Thickness 75mm.
- For D grade as rolled condition accepted up to 50 mm thickness (Pt D Ch 2 Sec 1 table 5)
High Strength (AH32, DH32, AH36, DH36)
Al + (Nb+V+Ti)
AR, TM, N, NR
Max. Thickness 75mm.
- for AH 32 and AH36 grades as rolled condition accepted up to 35 mm thickness (Pt D Ch 2 Sec 1 table 9)
- For DH 32 and DH36 grades as rolled condition accepted up to 25 mm thickness (Pt D Ch 2 Sec 1 table 9)

Survey conditions:
The plates are to be in compliance in all respects with the relevant RINA rules and are to be tested accordingly.

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA India Marine October 9, 2024
**** NOTICE: This is NOT an official certificate ****