Description
The NCL_V1.2_ST is an electronic system based microprocessor controlled device that provides full functionality
control and monitoring of 16 outputs. The system is tailored for control and monitoring of electronic devices, especially
those serving critical safety functions. It offers dual power supply to ensure continuity of operation in case of power
failure and provides a direct control connection for manual or alternative operation during electronic control system
malfunctions. The system incorporates operating hour monitoring for individual outputs, especially beneficial for LED
lights,aiding in maintenance and replacement scheduling.
System fulfill all requirements to control navigation and signal lights, with LED or incandescent lamps on board ships.
Features
The NCL_V1.2_ST has following features:
- low profile design for installation in 35 mm rails.
- Control and monitoring of 16 circuits with possibility of extension without limitation (with use of required
Ethernet switch).
- Short circuit proof outputs and two way current monitored
- Optional continuity checking mode in Outputs of Safety Circuits controller.
- Fast and reliable electronic short-circuit and overload protection with a trip time below 25ns.
- Soft start for high inrush current loads
- Onboard timers calculating channel runtime (0.5h accuracy) for load end-of-lifetime indication.
- Power supply monitored on both power supplies,
- Ethernet communication with MODBUS protocol, for easy and universal system fitting with any available HMI panel,
PLC or SCADA systems.
- Serial interface for debugging and external control RS232.
- Website server on board, for control, troubleshoot configuration and operation monitoring
Technical Parameters
| Power supply (depending on model) | 24 VAC/DC (+30%/ -25%) fitted for battery power
115 VAC/DC (+30%/ -40%)
230 VAC/DC (+20%/ -50%) |
| Current consumption (device only) | 24V: 100 - 350 mA
115V: 10- 100 mA
230V: 5 - 50 mA |
| Operating temperatures | -25 C - 70 C |
| Weight | 0.76 kg |
| External dimensions | 330 x 120 x 65 mm |
| Interfaces | 1 x Ethernet- Modbus TCPIP, web server, OTA
1 x DSUB9F - RS232, debug remote control
1 x Communication bus- for manual override function |
TYPE APPROVAL CERTIFICATE |
No.
ELE052324XP |
Enclosure - Page 2 of 2 |
NCL_V1.2_ST |
|
|
Technical Parameters
| Channel protections | 24 V- 3 A
115 V - 1 A
230 V - 500 mA |
| Maximal input current | 24 V- 20 A
115 V - 8 A
230 V - 8 A |
| Mounting | DIN TS 35 Rail |
Reference documents
Navigation Light Controller/ Safety Circuits Controller functional Description - 25.09.2023
Navigation lamps control system V1.2
Navigation light controller- Block Schematic NLC_V1.2ST Schematic
Test Report
Compass Safe Distance Testing Test Report DPL/003/170/23
Electromagnetic Compatibility Tests Test Report DPL/003/169/23
Resistance to Mechanical Exposure Test Test Report DPL/003/168/23
Visual inspection, performance test, electromagnetic compatibility tests Test Report No. 1/2023
Environmental Tests Test Report No. 2/2023
Remarks
- For each installation & configuration, the following documentation is to be submitted for approval:
- System description / scope of supply
- System block diagram including power supply diagram
- Factory Acceptance Test Procedure
- Traceability of Hardware and Software is to be ensured for each installation and evidence is
to be available on request.
- The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates.
- Type Approval certifies that a representative sample of the product has been found to meet the applicable
design criteria.
- Stemor NCL_V1.2_ST complies with all navigation light controller requirements published in IMO performance
standard Res, MSC 253(83).
- Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment.
This certificate annulus and replaces Type Approval Certificate ELE027424XP |
|