Materials/Components
Control and communication cables for fixed installations in marine and offshore use, halogen free, flame retardant
Rated voltage: 250 V
Type: RFE-F-HF 250 V; RFE-F-HF(i) 250 V; RFE-F-SHF2 250 V RFE-F-SHF2(i) 250 V
FIre resistant type: RFE-F-FRHF 250 V; RFE-F-FRHF(i) 250 V; RFE-F-FRSHF2 250 V RFE-F-FRSHF2(i) 250 V
Marking: "lot number" cable type n x s mm2 250 V 90°C IEC 60092-376 IEC 60332-3-22 HELKAMA "month-year" "lenght marking"
Contraction meaning:
RFE is used in general for multiunit (pair, triple, quad) cables, armoured (also work as common screen) copper wire braid. Common for all RFE- is insulation cross-linked polyethene (XLPE)
F means filler compound as bedding (Filler)
FR means fire Resistant type (mica tape wrapped over conductor)
HF means SHF1 outer sheath material (SHF1)
SHF2 means (oil resistant) outer sheath material (SHF2)
(i) means individual unit screened, aluminum foil. Cables without (i) is not unit screened
Construction:
Conductor: stranded, plain annaled copper (according to IEC 60228 Class2)
Insulation: halogen free crosslinked polyethylene plastic (for the fire resistan type, there is a fire resistant mica tape under layer)
Inner covering: covered by a non-hygroscopic halogen free filling material
Armour: braid of plain (optionally tinned) copper wires
Sheath: thermoplastic, halogen free
In accordance to
- IEC 60092-376: 2017 (construction standards)
- IEC 60092-350: 2020 (testing)
- IEC 60092-360: 2021 (Insulating materials)
- IEC 60332-1/2 and IEC 60332-3-22 (flame retardant)
- IEC 60331-1/2 (for the fire resistant cable)
- IEC 60754-1/2 (acid gas emission and pH and conductivity test)
- IEC 61034-1/2 (smoke emission)
Type approval certificate
No. ELE357323CS
Enclosure - Page 2 of 2
RFE-F-FRHF 250 V,
RFE-F-FRHF(i) 250 V,
RFE-F-FRSHF2 250 V,
RFE-F-FRSHF2(i) 250 V
RFE-F-HF 250 V,
RFE-F-HF(i) 250 V,
RFE-F-SHF2 250 V,
RFE-F-SHF2(i) 250 V
Maximum conductor temperature: 90°C
Technical Specification: HELKAMA SPECIFICATION:
HBKQ 9.SPEC.251 8.7.2021/dk
HBKQ 9.SPEC.252 8.7.2021/dk
HBKQ 9.SPEC.253 8.7.2021/dk
HBKQ 9.SPEC.254 8.7.2021/dk
Remarks:
The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates
Type Approval certifies that a reppresentative sample of the products has been found to meet the applicable design criteria.
Any modification of change shall not be valid until approval is granted by RINA as a result of due assessment.
The test reports for IEC 60331-1/2; IEC 60332-1/2; IEC 60332-3-22; IEC 30754-1/2 have been uploaded on Leonardo Draw Plus under the job RS/2023/CS/01/3573
Other Place of Manufacturing:
a) HELKAMA BICA (SHANGHAI) Co., Ltd.
Plot 1-2 Minghang Export Processing Zone, Shanghai, 201401 P:R.C.
b) HELKAMA BICA Oy
Lasitehtaankatu 12, FI-10960 Hanko, Finland.