Single leaf sliding door whose maximum clear opening size is 2500 mm (W) and 2580 mm (H). The leaf, having maximum dimensions of 2735 mm in width and 2735 mm in height, is 104 mm thick and it is composed of two stainless steel sheets, having thickness of 2 mm and, in between, the insulating material. Such insulation is composed of an insulating material named Firemaster Marine Plus (old trade name Firemaster 607) having overall thickness of 100 mm (two layers having nominal thickness of 38 mm and one layer having nominal thickness of 25 mm) and density of 96 kg/m3.
The leaf is fitted with reinforcements on the perimeter, made of an asymmetric C shaped stainless steel profile on the top side and, on the other three sides, of C shaped stainless steel profiles, 3 mm thick, welded to the stainless steel sheets. The leaf, on each face, is fitted with two vertical L shaped stainless steel stiffeners, 2 mm thick and having dimensions of 20 x 40 mm, welded to the stainless steel sheets.
The stainless steel sliding guide, produced by HELM and named Art. No. 400, has thickness of 3.2 mm, width of 48.5 mm and height of 43.5 mm. The suspension elements with height adjustable joint, produced by HELM and named Art. No. 404, have width of 68 mm. In correspondence to the suspension elements, the sliding guide is fixed to the bulkhead by means of four brackets 860 mm far from each other and made of a stainless steel element having an overhang of 153 mm.
The leaf is fitted with a window made of a glass type Pyrostop 60-201 produced by Pilkington, having dimensions of 240 mm in width and 540 mm in height, with a thickness of 27 mm. The window’s inside frame is composed of two C shaped stainless steel profiles on each side, fixed to an insulating material named Promatect H, having density of 870 kg/m3 and dimensions of 20 x 30 mm, by means of bolts type M5x35 (four on each vertical edge and two on each horizontal edge).The window’s inside frame, on each side, is composed of two shaped stainless steel profiles that support the glass and it is completed with an insulating material type Fiberfrax Duraboard 120LD (or type Insulfrax Board 110 LD) having section of 3 x 20 mm. Another insulating layer made of Fiberfrax Duraboard 120LD (or Insulfrax Board 110 LD) and having section of 5 x 104 mm is provided in the window’s frame.
The leaf is fitted with a closure system, actuated by a stainless steel handle.
The door frame is composed of stainless steel profiles 3 mm thick. These elements form the roller guides and the labyrinths on the edges of the leaf. The door frame may be fixed to the bulkhead by means of 54 bolts type M8x25 with pitch of 150 mm or by means of welding.
|
ATTACHMENT TO
CERTIFICATE Nr. MED491625CS
Page 2 of 3 |
Field of application Fire resistant A-60 Class single leaf sliding door with the fire hazard on both sides in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf;
- maximum door size tested;
- door used with a fire tested frame design.
The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.
Reference documents BAGGEROD A.S. drawing No. 19088_203 Rev. 02 dated 4 December 2015 approved on 18 January 2016 with endorsement No. LABS-1199;
Tests carried out -Tests as per RINA Test Laboratory report No. 2014CS011591/6 and 2014CS011591/7 issued on 18 January 2016 according to IMO 2010 FTP Code Part 3;
-RISE Fire Research Technical Assessment of insulation in window frames No. 150101-30 revision 3 dated 4 October 2023. |