MED111725CS!007ENGD- -  -  N- MI-B0 WITH PLENUM -N- S- S- -01/07/2025- Marine Equipment- - SN- S- - N-  - 290,487B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED111725CS/007- N-Jun 30, 2030290487
 
Form
  Marine Equipment(TO)
Certification N. MED111725CS/007 - (ENG)
Certificate date 01/07/2025
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model or Denomin.
Items
MI-B0 WITH PLENUM
Applicant MARINE INTERIORS CABINS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3.4,SOLAS 74 Reg. II-2/9,IMO Circ. MSC 1120,IMO Circ. MSC.1 1581
Request 27/10/2020
Expire date 30/06/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED111725CS/007

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type MI-B0 WITH PLENUM
Applicant MARINE INTERIORS CABINS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3.4; SOLAS 74 Reg. II-2/9; IMO Circ. MSC 1120; IMO Circ. MSC.1 1581
Issued in Genoa on
This Certificate is valid until
July 1, 2025
June 30, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED111725CS/007
Page 1 of 3

Product description

B-15 Class bulkhead certified by RINA with EC Type Examination Certificate No. MED0281720CS/001 dated 30 October 2020. The bulkhead may be fitted with the following accessories:
- Type 2 carbon steel sheet box, 1 mm thick, having dimensions of 300 x 370 mm and height of 650 mm insulated, on the internal side, with one layer of mineral wool type Paroc Marine Slab 60, 25 mm thick each and having density of 60 kg/m3. The box is internally sheathed with a perforated carbon steel sheet 8/10 mm thick and having a void percentage of 30%. The box, fitted at a distance of 60 mm from the lower edge of the bulkhead, is fixed, by means of screws (TB 3.5x13 mm and pitch 130 mm), to a steel sheet, 1 mm thick, screwed to the bulkhead surface by means of screws (TB 3.5x13 mm and pitch 130 mm). The box is provided, on the box top center, of a hole having diameter of 200 mm. The box is 30 mm away from the surface of the bulkhead and this gap is filled with two layers of mineral wool with glass fabric type Paroc Marine Slab 180, 25 mm thick each and having density of 180 kg/m3. Inside the box there is baffle having thickness of 50 mm in the vertical portion and 25 mm in the remaining part. The insulation is made with one and two layers of mineral wool with glass fabric type Paroc Marine Slab 60, 25 mm thick each and having density of 60 kg/m3. The whole surface of the element is made with a perforated carbon steel sheet 8/10 mm thick and having a void percentage of 30%. The wall mounted grid is 300 mm wide and 550 mm height with a net area of 0.09 m2.
- Type 3 carbon steel sheet box, 1 mm thick, having dimensions of 300 x 370 mm and height of 650 mm insulated, on the internal side, with one layer of mineral wool type Paroc Marine Slab 100, 25 mm thick each and having density of 100 kg/m3. The box is internally sheated with a perforated carbon steel sheet 8/10 mm thick and having a void percentage of 30%. The box, fitted at a distance of 60 mm from the lower edge of the bulkhead, is fixed, by means of screws (TB 3.5x13 mm and pitch 130 mm), to a steel sheet, 1 mm thick, screwed to the bulkhead surface by means of screws (TB 3.5x13 mm and pitch 130 mm). The box is provided, on the box top center, of a hole having diameter of 200 mm. The box is 30 mm away from the surface of the bulkhead and this gap is filled with two layers of mineral wool with glass fabric type Paroc Marine Slab 180, 25 mm thick each and having density of 180 kg/m3. Inside the box there is baffle having thickness of 50 mm in the vertical portion and 25 mm in the remaining part.





 



ATTACHMENT TO
CERTIFICATE Nr. MED111725CS/007
Page 2 of 3
The insulation is made with one and two layers of mineral wool type Paroc Marine Slab 100, 25 mm thick each and having density of 100 kg/m3. The whole surface of the element is made with a perforated carbon steel sheet 8/10 mm thick and having a void percentage of 30%. The wall mounted grid is 300 mm wide and 550 mm height with a net area of 0.09 m2.
- Type 4 carbon steel sheet box, 8/10 mm thick, having dimensions of 300 x 370 mm and height of 650 mm insulated, on the internal side, with one layer of mineral wool with glass fabric type Paroc Marine Slab 180, 25 mm thick each and having density of 180 kg/m3. The box is internally sheathed with a perforated carbon steel sheet 8/10 mm thick and having a void percentage of 30%. The box, fitted at a distance of 60 mm from the lower edge of the bulkhead, is fixed, by means of screws (TB 3.5x13 mm and pitch 130 mm), to a steel sheet, 1 mm thick, screwed to the bulkhead surface by means of screws (TB 3.5x13 mm and pitch 130 mm). The box is 30 mm away from the surface of the bulkhead and this gap is filled with two layers of mineral wool with glass fabric type Paroc Marine Slab 180, 25 mm thick each and having density of 180 kg/m3. Inside the box there is baffle having thickness of 50 mm in the vertical portion and 50 mm in the remaining part. The insulation is made with two layers of mineral wool type Paroc Marine Slab 50, 25 mm thick each and having density of 50 kg/m3. The whole surface of the element is made with a perforated carbon steel sheet 8/10 mm thick and having a void percentage of 30%. The wall mounted grid is 300 mm wide and 550 mm height with a net area of 0.09 m2.

Field of application
Fire resistant B-0 Class bulkhead with accessories for general application.

Reference document
MARINE INTERIORS SPA drawing No. +24PC00229.00 Rev. 0 dated 25 September 2014 approved on 5 June 2015 with endorsement No. LABS-1074.
Tests carried out
Tests as per RINA Test Laboratory report No. 2014CS012276/1 issued on 5 June 2015 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED111725CS/007
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****