ELE231325XGENGB- -  -  N- ME Engine Control System -N- S- S- -21/08/2026- Prodotti Elettrici- - SN- N- Giuseppe Russo- N-  - 835,115Giuseppe RussoBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE231325XG- N-Aug 20, 2031835115
 
Form
  Prodotti Elettrici(TO)
ELE231325XG
Certification N. ELE231325XG - (ENG)
Certificate date 21/08/2026
Type Impianti di Automazione
Product Sistema di controllo per motori Diesel a due tempi, di propulsione

Model or Denomin.
Items
ME Engine Control System
ME-ECS/ ME-ECS-GI/ ME-ECS-LGI/ ME-ECS-GA
Applicant Everllence
Place of requester TEGLHOLMSGADE 41  %  DK-2450 Copenhagen  % DENMARK
Tel. N.,Fax, Email +45 33 85 11 00, +45 33 85 10 30, ---
Standards Rules for the Classification of Ships - Part C - Machinery Systems and Fire Protection,Ch. 3,Sec. 8, Table 1,Pt C,Ch. 3,Sec. 3 (IACS UR E22 "On Board use and Applicaiton of Computer based Systems"),Pt C,Ch. 3,Sec. 5 (IACS UR E27 "Cyber resilience of onboard systems and equipment")
Expire date 20/08/2031
Head Office Hamburg
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE231325XG
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Control system for two strokes, propulsion diesel engine
Type ME Engine Control System
ME-ECS/ ME-ECS-GI/ ME-ECS-LGI/ ME-ECS-GA
Applicant Everllence
TEGLHOLMSGADE 41
DK-2450 Copenhagen
DENMARK
Reference standards Rules for the Classification of Ships - Part C - Machinery Systems and Fire Protection,Ch. 3,Sec. 8, Table 1,Pt C,Ch. 3,Sec. 3 (IACS UR E22 "On Board use and Applicaiton of Computer based Systems"),Pt C,Ch. 3,Sec. 5 (IACS UR E27 "Cyber resilience of onboard systems and equipment")
  

 
 
   .   This Certificate is valid until August 20, 2031
_________________________________
RINA Services S.p.A.
Giuseppe Russo
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE231325XG
Enclosure - Page 1 of 2
ME Engine Control System
Product Description:
In the ME Engine concept the ECUs and the CCUs control the fuel injection and the operation of the exhaust valves. Additionally the ECUs control the Alpha Lubricator System. The ECUs handle Interface to external systems and the ACUs control auxiliary systems of the ME engine, such as the hydraulic power supply and auxiliary blowers. This certificate is based on the information in ME ECS General System Information 3099296-9 and 3099295-7
Main Functions:
Engine start, stop and reversing
Control of fuel injection pump, exhaust valve and starting valve activation
Automatic speed control
Control of cylinder lubrication
Monitoring (for alarm and safety systems
Scavenging air pressure control (optional)
Autotuning (optional)
Sequential Rubocharging (optional)
Sequential Injection (optional)
Control Stations:
Bridge Panel (through an external RCS system)
MOP: Main Operation Panels (engine control room)
LOP: Local Operation Panel (local control – engine side)
The Multi Purpose Controller (MPC) used in the following:

Control Units (MPC’s):

EICU: Engine Interface Control Unit (two for redundancy)
ECU: Engine Control Unit (two for redundancy)
ACU: Auxiliary Control Unit (three per engine)
CCU: Cylinder Control Unit (one per cylinder)
SCU: Scavenging Air Control Unit (optional)
Components:
MPC: Multi Purpose Controller 1142075-2
MPC-10: Multi Purpose Controller (CCU) 1882134-4
DASU: Data Acquisition & Supervision Unit 1882441-1
EC-MOP 1882467-5
Control Network PCI Board 1880315-5
CNR: Control Network Repeater 1142065-6
Amplifier, variant for ELFI 1142078-8
Amplifier, variant for smaller hydraulic proportional valves 1142864-8
Amplifier, variant for FIVA and larger hydraulic proportional valves 1880516-8
TSA: Tacho Signal Amplifier 1142867-3
ELFI Linear Motor 46695284
FIVA Linear Motor 46670233
ELVA HR Valve (pilot valve) 46695285
ELWI/ELGA – directional control valve 5243378-9
ELFI/ELVA – directional control valve 5080366-4
Position Sensor, short type (used for ELFI and ELVA) 3172329-9
Position Sensor, long type (used for ELFI and ELVA) 4022053-1
Amplifier (LDI)(for hydraulic pump swash plate position) 1142860-0
Amplifier (LDVT)(for hydraulic proportional valve position) 1142861-2
Angle encoder 3070554-3
Inductive Proximity Sensor (for marker pulses) 1142953-5
Magneto Resistive Sensor (for trigger pulses) 1324233-1
FIVA Position Sensor 3060156-6
Track-ball 1142881-5


TYPE APPROVAL CERTIFICATE
No.: ELE231325XG
Enclosure 1 - Page 2 of 2

Components (continued):
Triton - Main Operator Panel
Triton - Base Module
Triton - Power Supply Module
Triton - CPU Module
Triton - ID Key
Triton - Modbus Module
Triton - Digital I/O Module
Triton - Analog I/O Module
Documents and Drawings:

List of electronic components for ECS, Item Id. 3093398-0, page 1-5


ME ECS General System Information 3099296-9 and 3099295-7
General System Information of ME-LGI 3099567-8
General System Information of ME-GI 3099295-7
Programme for TAT of Software MAN B&W ME Engine Control System 3090685-1
Type Approval Test Report of Engine Control System of MAN B&W Diesel ME ECS v. 1304, 3099297-0.1
Shop Trials Procedure No. 1475229-1 (200bar System), No. 5151619-0 (300bar System)
Quay & Sea Trial Report Procedure No. 1475287-6 (200bar System), No. 5172536-4 (300bar system)
Program for FAT of Software MAN B&W ME-GI Engine Control System, Ident no. 3093265-0

Test Reports

DELTA Test Report, DANAK-196551, project E500330-1, issued on 18 November 2002


DELTA Test Report, DANAK-196859, project E500957-1, issued on 31 March 2003
DELTA Test Report, DANAK-197319, project E501548-1, issued on 29 January 2004
DELTA Test Report, DANAK-197558, project E502069-1, issued on 03 August 2004
DELTA Test Report, DANAK-198235, project A503355-1, issued on 20 January 2006
DELTA Test Report, DANAK-198943, project A504844, issued on 12 December 2007
DELTA Test Report, DANAK-1911075, project A507072, issued on 29 September 2010
DELTA Test Report, DANAK-1911545, project T200434, issued on 01 November 2011
EKTOS Test Reports, P21-0112-1/ -3/ -5/ -6, issued 04 November 2021
EKTOS Test Report, P21-0112-4, issued 01 November 2021
EKTOS Test Report, P21-0164, issued 19 May 2022
EKTOS Test Report, P22-0161, issued 07 December 2022
SP Test Report, 3P02146, issued on 08 July 2013
Type Approval Test Report 3099787-1, 3099694-7, 3099636-2, 3099642-1
Final Type Approval Test Report Doc. no. 3095636-2.1

Software versions:

ME-ECS (MPC) SW versions: 1909-*, 1903-*, 1712-*, 1609-*, 1710-*, 1603-*, 1601-*, 1506-*, 1502-*, 1312-*


ME-ECS (Trition) SW versions: 2311-*, 2210-*, 2205-*, 2101-*, 2012-*


Remarks:
- The specific functional and operational arrangements are to be separately approved for each particular application.
- System Category II/III: Fault simulation, final system Factory Acceptance Test (FAT), on-board system and integration test are to be witnessed by the Surveyor.

This certificate annuls and replaces the previous certificate no. ELE044023XG/001






TYPE APPROVAL CERTIFICATE
No. ELE231325XG
Enclosure 2 - Page 1 of 2
ME Engine Control System

Product Description
In the ME Engine concept the ECUs and the CCUs control the fuel injection and the operation of the exhaust valves. Additionally the ECUs control the Alpha Lubricator System. The ECUs handle Interface to external systems and the ACUs control auxiliary systems of the ME engine, such as the hydraulic power supply and auxiliary blowers. This certificate is based on the information in ME ECS General System Information 3099296-9 and 3099295-7. ME ECS is architected to segregate their assets, interfaces, and communication channels into different security and network zones to achieve isolation from each zone and limit the impact of compromise of any particular zone, asset, or channel. The system is protected by firewall gateway and connection to untrusted networks is allowed.

Testing
Integration testing of the Engine Vault System for ME ECS has been carried out on a Simulation environmet according to requirements of IACS UR E27, IEC 62443-3-3 SL1 and RINA Rules, witnessed by RINA on 12 March 2026. The test program included the following tests:

2.1 SR 1.1 – User Identification and Authentication of Human Users .


2.2 SR 1.5 – Authenticator management
2.3 SR 1.11 – Unsuccessful login attempts
2.4 SR 2.1 – Authorization Enforcement
2.5 SR 2.3 – Use Control for Portable and Mobile Devices
2.6 SR 2.5 – Session Lock
2.7 SR 2.8 – Auditable Events
2.8 SR 3.2 – Malicious Code Protection
2.9 SR 4.1 – Information Confidentiality
2.10 SR 5.1 – Network Segmentation
2.11 SR 6.1 – Audit Log Accessibility
2.12 SR 7.1 – Denial of Service Protection (DoS)
2.13 SR 7.3 – Control System Back-Up
2.14 SR 7.6 – Network and Security Configuration Settings

Reference documents
0743335-2.3 Electronic Components - Quality Specifications
20230830 SH8021 DNV ME CS Test Report -m
20240708 DNV SN279 ME CS Test Report -m
20240821 TAC template ECS Subsystems
20240821 TAC template ECS Subsystems
20250107 List of ME CS Tests
20250519 CS Applications to Classes
3093398-0.21 LoEC
3095546-5.02 IEC-ECS-mapping
3095831-6 How to Restore the EMS-MOP System Software - 1884324-8
3095875-9 VNC Guide for Windows 10 MOP
3096194-6 How to restore the MOP system software
3096287-0.03 Network Architecture Concept of ECS (SL1)
3096307-5.10 Cyber Test
3096309-9.02 Cyber compensating countermeasures
3096340-8.01 Logging Service - Test Specification









TYPE APPROVAL CERTIFICATE
No. ELE231325XG
Enclosure 2 - Page 2 of 2
ME Engine Control System


Reference documents (continued)
3096379-3.00 Accounts Overview
3096409-4.00 ECS MOP Unlock - Service Engineer
3099296-9.9 GSI ECS , CS
6295280-4.3 Cyber Security Documentation
DL24PDA00014,Cert,D01.,1724918426183
DoC 20241112 CS compliance E27, IEC 62443 -m
S906-0055 How to Restore the MOP Software Installation

Remarks
- OMD was not part of the certification scope since Everllence is not responsible for integrating the OMD into ME ECS.
- Everllence uses a hard system boundary at the interfaces between ME ECS automation system and the OMD.
- Everllence provides a list of functionally validated OMDs that the integrator can choose from.

Disclaimer
The validity of this Certificate is subject to maintenance of the initial product conditions verified by RINA Services. Changes to the initial conditions must be communicated to RINA Services which reserves the right to carry out further verification activity to confirm the validity of this Certificate.
The rules, surveys and activities performed by RINA, reports, certificates and other documents issued by RINA are in no way intended to replace the duties and responsibilities of other parties such as Governments, designers, ship builders, manufacturers, repairers, suppliers, contractors or sub-contractors, owners, operators, charterers, underwriters, sellers or intended buyers of a ship or other product or system surveyed.


Hamburg August 21, 2026
**** NOTICE: This is NOT an official certificate ****