MED497721CSENGB- -  -  N- PORTA ARREDO -N- S- S- -10/03/2022- Marine Equipment- - SN- S- - N-  - 1,036,458B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED497721CS- N-Mar 9, 20271036458
 
Form
  Marine Equipment(TO)
MED497721CS
Certification N. MED497721CS - (ENG)
Certificate date 10/03/2022
Type Protezione antincendio
Product 'C' Class divisions
Item Nº MED/3.64

Model or Denomin.
Items
PORTA ARREDO
Applicant NAVAL ACTIVITY & ENGINEERING S.R.L.
Place of requester AGG.TO ASI NOLA MARIGLIANO S.C.  %  80035 Nola (NA)  % ITALY
Tel. N.,Fax, Email 0818210268, ---, navalactivity@gmail.com
Directive (EU) 2021/1158
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 14/12/2021
Expire date 09/03/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED497721CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.64
Description 'C' Class divisions
Type PORTA ARREDO
Applicant NAVAL ACTIVITY & ENGINEERING S.R.L.
AGG.TO ASI NOLA MARIGLIANO S.C.,80035 Nola (NA),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
March 10, 2022
March 9, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED497721CS
Page 1 of 2
Product description

Single leaf hinged door with maximum clear light of 600x1800 mm (WxH). The leaf, having maximum dimensions of 616x1816 mm (WxH) and thickness 23 mm is composed of two aluminum alloy 5754 panels, 1.5 mm thick each; between the two above mentioned panels is provided a rectangular shape aluminum profile having dimensions 40x20 mm and thickness of 2 mm. The perimeter of the leaf is provided with C shaped aluminum profiles 1.5 mm thick having dimensions 26x8 mm fitted to the above mentioned rectangular shape aluminum profile by aluminum rivets 4.8x16 mm with a pitch of 70 mm. The door is equipped with three stainless steel hinges and one stainless steel lock. The leaf may be provided of a steel ventilation grid on both sides with maximum dimensions of 380x192 mm and a maximum free air area of 0.03 m2. The door frame is composed by two extruded 3 mm thick aluminum profiles: the first “Z” shaped profile having dimensions of 22x48x16 mm and the second “L” shaped profile having dimensions of 30x25 mm; the two profile are fitted to the bulkhead by means of aluminum rivets 4.8x16 mm with a pitch of 70 mm. Between the rebate and the leaf is provided a layer of intumescent material having thickness of 2 mm.
Field of application

C Class division.
Reference documents

Naval Activity S.r.l drawing No. “porta arredo REV_6(1) – Layout1” dated 13 March 2017, Rev. 6 dated 9 March 2022, RINA reference number 2021CS014977 dated 10 March 2022.




ATTACHMENT TO
CERTIFICATE No. MED497721CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****