MED093122CS!001ENGD- -  -  N- SOMEC FRP P 005 -N- S- S- -14/03/2022- Marine Equipment- - NN- S- - N-  - 162,855B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED093122CS/001- N-Feb 28, 2027162855
 
Form
  Marine Equipment(TO)
Certification N. MED093122CS/001 - (ENG)
Certificate date 14/03/2022
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a

Model
Items/Sizes
SOMEC FRP P 005
Applicant SOMEC S.P.A.
Place of requester VIA PALÙ 30  %  31020 San Vendemiano (TV)  % ITALY
Tel. N.,Fax, Email 0438471904, 0438471800, info@somecgroup.com
Directive (EU) 2021/1158
Standard IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1435
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 25/2/2022
Validity 28/02/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED093122CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.11a
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type SOMEC FRP P 005
Applicant SOMEC S.P.A.
VIA PALÙ 30,31020 San Vendemiano (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1435
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
March 14, 2022
February 28, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED093122CS/001
Page 1 of  2

Product description

Bulkhead consisting of panels having maximum height of 2320 mm and maximum width of 1240 mm. Such panels are composed of one steel sheet, 2 mm thick, and one layer of mineral wool with aluminium foil type Icerock Ductwarp, having thickness of 25 mm and density of 45 kg/m3, fixed to the steel sheet by means of pins and washers welded with pitch ranging from 195 up to 320 mm. The panel joints consist of L shaped bent edges of the steel sheets, insertion of an U shaped steel profile, 2 mm thick and having dimensions of 74x53 mm and fixing by means of M8 screws. The U profiles are filled with the same mineral wool and the joints are covered, on the side opposite to the steel sheets, with a further layer of mineral wool having width of 300 mm. The joints are sealed, on the side fitted with the steel sheets, with gaskets type KERAFIX FLEXPAN 200, 2 mm thick, and product named SIKAFLEX 295 UV.
Field of application
Fire resistant A-0 Class bulkhead with fire hazard on side fitted with the mineral wool.
Reference documents
SOMEC drawing No. 276MU005 dated 24 February 2017 approved 1 March 2017 with endorsement No. LABS-1419.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2017CS01616 issued on 1 March 2017 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED093122CS/001
Pages 2 of  2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****