ENGGS22/08/2014
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED089414WS/001
Certificate date 8/22/14
Type Mezzi di salvataggio
Directive 2012/32/EU
Product Launching appliances using falls (Davits) &
Liferaft Launching appliances (Davits)  
Item Nº A.1/1.21; A.1/1.24
Model 25KN-4.5M
Identification S/N:1403144R; Intended for Hudong shipyard  HULL. NO: H1695A (RI 91213)
Manufacturer NINGBO KAIRONG SHIP MACHINERY CO., LTD.
Tel. N.,Fax, Email +86 574 86111777, +86 574 86111788, ---
Place of production 86 MOULD ROAD, DAQI INDUSTRIAL PARK,BEILUN NEW DSTRCT,NINGBO  %  315806 ZHEJIANG  % CHINA
Tel. N.,Fax, Email +86 574 86111777, +86 574 86111788, ---
Applicant NINGBO KAIRONG SHIP MACHINERY CO., LTD.
Place of requester 86 MOULD ROAD, DAQI INDUSTRIAL PARK,BEILUN NEW DSTRCT,NINGBO  %  315806 ZHEJIANG  % CHINA
Tel. N.,Fax, Email +86 574 86111777, +86 574 86111788, ---
Standards SOLAS 74/96 as amended Reg. III/23, Reg. III/33 and Reg. III/34, IMO Res.MSC.48(66), IMO Res.MSC.97(73), IMO Res.MSC.81(70), 8.1, 8.5, 8.6 and 8.7 (HSC Code 2000)
Surveyor Tan Qiangfu
Head Office SHANGHAI



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED089414WS/001

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/1.21 & A.1/1.24
Description Launching appliances using falls (Davits) &
Liferaft Launching appliances (Davits)  
Model 25KN-4.5M
Identification S/N:1403144R; Intended for Hudong shipyard  HULL. NO: H1695A (RI 91213)
Applicant NINGBO KAIRONG SHIP MACHINERY CO., LTD.
86 MOULD ROAD, DAQI INDUSTRIAL PARK,BEILUN NEW DSTRCT,NINGBO
315806 ZHEJIANG
CHINA
Testing standards IMO Res. MSC.81(70) as amended
    
Issued at Shanghai 
on August 22, 2014

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /14
 

________________________________________
RINA Services S.p.A. - Hong Gu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED089414WS/001
Manufacturer:
NINGBO KAIRONG SHIP MACHINERY CO., LTD.
Address
86 MOULD ROAD, DAQI INDUSTRIAL PARK,BEILUN NEW DSTRCT,NINGBO
315806 ZHEJIANG
CHINA

Verified components of the equipment (with serial number)
S/N:1403144R; Intended for Hudong shipyard  HULL. NO: H1695A (RI 91213)
Technical documentation
- Drawing No.SHST-17772 approved by RINA dated on 01/08/2014 in compliance with SOLAS 74/96 as amended Reg. III/12,  III/16,  III/23, III/33 and III/34; IMO Res. MSC.36(63)-(1994 HSC Code) 8; IMO Res. MSC.48(66)-(LSA Code) I, VI; IMO Res.MSC.97(73)-(2000 HSC Code) 8.

- Test report issued by RINA on 13/05/2014 (S/N.:1404018) in accordance with resolution MSC.81(70) and amendment

- Main characteristic of davit:
  Max. working load: 25kn;
  Max. hoisting load: 14kn;
  Measured recovering speed: >0.3m/s
  Min. lower load: 6.8kn
  Winch type:KR-4W;
  Steel wire dimension: Φ16-18 x 19 + IWS mm
  Braking load of wire rope:>=157KN

Limitation on the acceptance or use of the product
Allowable working inclination: Trim: 10 deg list: 20 deg
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA Services S.p.A. - Hong Gu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****