FAB041425XFENG- -  -  N- Carbon-carbon manganese and low alloyed hot rolled and finished rolled steel bars -N- S- S- -04/04/2025- Fabbricanti Approvati- - SN- N- - S-  - 573,852BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB041425XF- N-Apr 3, 2030573852
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB041425XF - (ENG)
Certificate date 04/04/2025
Type Approvazione di fabbricanti di materiali
Product Barre in acciaio

Model or Denomin.
Items
Carbon-carbon manganese and low alloyed hot rolled and finished rolled steel bars
Applicant OVAKO IMATRA OY AB
Place of requester TERASTEHTAANTIE 1  %  55100 Imatra  % FINLAND
Tel. N.,Fax, Email +358 (0)40 359 4870, tarja.miettinen@ovako.com
Standards RINA Rules for the approval of manufacturers of materials
Reference Documents RINA Rules
Expire date 03/04/2030
Responsible Office RINA Finland Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB041425XF
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Steel bars
Type Carbon-carbon manganese and low alloyed hot rolled and finished rolled steel
bars

Applicant OVAKO IMATRA OY AB
TERASTEHTAANTIE 1
55100 Imatra
FINLAND
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until April 3, 2030
_________________________________
RINA Services S.p.A.
Andrey Dele
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB041425XF
Enclosure - Page 1 of 1
Carbon-carbon manganese and low alloyed hot rolled and finished rolled steel bars

APPROVAL CONDITIONS



- The chemical composition, delivery condition and mechanical properties are to be in accordance
with the RINA requirements or national/international standards

- The products are to be tested according to the RINA Rules

- The approval is valid for Hot Rolled and Finished Rolled Engineering Steel Bars made from steel grades 34CrNiMo6, 42CrMo4 and 25CrMo4 with diameter range from 14 mm to 200 mm






General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA Finland Marine 04.04.2025
**** NOTICE: This is NOT an official certificate ****