MED287925CS!001ENG- -  -  N- Paint system 1: primer Carboguard E 19, Carbomastic 18FC, topcoat Carboxane 2000 TC -N- S- S- -23/07/2025- Marine Equipment- - SN- S- - N-  - 2,352,717B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED287925CS/001- N-Jul 22, 20302352717
 
Form
  Marine Equipment(TO)
Certification N. MED287925CS/001 - (ENG)
Certificate date 23/07/2025
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (b) paint systems
Item Nº MED/3.18b
USCG Category N° 164.112

Model or Denomin.
Items
Paint system 1: primer Carboguard E 19, Carbomastic 18FC, topcoat Carboxane 2000 TC
Applicant Carboline Italia S.p.A.
Place of requester Largo Guido Donegani, 2  %  20121 Milano (MI)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/6, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ.1120.
Request 20/06/2025
Expire date 22/07/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED287925CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.18b
USCG Category Nº 164.112
Description Surface materials and floor coverings with low flame-spread characteristics: (b) paint systems
Type Paint system 1: primer Carboguard E 19, Carbomastic 18FC, topcoat Carboxane 2000 TC
Applicant Carboline Italia S.p.A.
Largo Guido Donegani, 2,20121 Milano (MI),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/6, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ.1120.
Issued in Genoa on
This Certificate is valid until
July 23, 2025
July 22, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED287925CS/001
Page 1 of 2

Product description



Paint system 1 consisting of primer “Carboguard E 19” (nominal thickness 50μm), Carbomastic 18FC grey 7038 (nominal thickness 100 μm) and topcoat “Carboxane 2000 TC” (nominal thickness 75 μm).

Field of application

As finishing material for all exposed interior and concealed or inaccessible surfaces (paint system).

The product may be applied to any metallic support having a thickness ³ 1.125 mm.

In case of use on surfaces and linings as specified in paragraph 3.2.1 of SOLAS 1974 Chapter II-2 Reg. 5, where the calorific value shall not exceed 45 MJ/m2 for the thickness used as required in paragraph 3.2.2, the use of the certified product must be evaluated.

Tests carried out

Tests as per SP Fire Research AS. Test Laboratory reports No. 130007-01A dated 26 February 2015 and No.130006-03 dated 6 March 2015 issued according to:
  • IMO 2010 FTP Code Part 5;
  • IMO 2010 FTP Code Part 2.




ATTACHMENT TO
CERTIFICATE No. MED287925CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****