MED410724CSENG- -  -  N- Superwool Plus Blanket -N- S- S- -22/10/2024- Marine Equipment- - SN- S- - N-  - 1,088,871B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED410724CS- N-Oct 21, 20291088871
 
Form
  Marine Equipment(TO)
Certification N. MED410724CS - (ENG)
Certificate date 22/10/2024
Type Protezione antincendio
Product Materiali non combustibili
Item Nº MED/3.13
USCG Category N° 164.109

Model or Denomin.
Items
Superwool Plus Blanket
Applicant THERMAL CERAMICS UK LTD.
Place of requester Merseyside Wirral  % UNITED KINGDOM
Tel. N.,Fax, Email +44 151 334 4030, ---, FERNANDO.AZNAR@MORGANPLC.COM
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 22/10/2024
Expire date 21/10/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED410724CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.13
USCG Category Nº 164.109
Description Non-combustible materials
Type Superwool Plus Blanket
Applicant THERMAL CERAMICS UK LTD.
Merseyside Wirral,UNITED KINGDOM
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
October 22, 2024
October 21, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED410724CS
Page 1 of 2

Product description

Roll in the form of a mat, needled in synthetic alkaline earth silicate fibres.
  • Nominal density range (kg/m3): 64 - 128 ± 10%
  • Nominal thickness range (mm): 6 - 50
  • Maximun organic content 0,12 %

The materials may also be produced by:

Grupo Industrial Morgan SA de CV Cerrada de la Paz 101, Zona Industrial La Paz, Mineral de La Reforma Mexico
Morgan Thermal Ceramics (Shanghai) Co., Ltd. 18, Kang An Road, Kang Qiao Industrial Zone, Pudong Shanghai China
Morgan Thermal Ceramics Korea 335, Nongong-ro, Nongong-eup, Dalseong-gun, Daegu Korea
Morgan Kailong (Jingmen) Thermal Ceramics Co., Ltd., 20-1# QuanKou Road, Jingmen, China
Murugappa Morgan Thermal Ceramics Ltd, SIPCOT Industrial Complex, Plot No. 26 & 27, Ranipet, India
Thermal Ceramics de France S.A., Zone Industrielle Les Plantees, Saint-Marcellin-en-Forez, France
Murugappa Morgan Thermal Ceramics Ltd., Plot No.-681, Moti Bhoyan Village, Sanand- Kalol State
Highway, Taluka- Kalol, Dist.- Gandhinagar, India
Morgan Advanced Materials Industries Ltd, Plot No : KHIA 4-07A, Khalifa Industrial Zone, Abudhabi, United Arab Emirates
Thermal Ceramics, Inc., 2102 Old Savannah Rd, Augusta, USA

Field of application

As non combustible material.
Tests carried out

Tests as per RINA Test Laboratory reports Nos. 2024CS014107/1/2 and Nos. 2024CS014107/3 dated 21 October 2024 issued according
to IMO 2010 FTP Code Part 1.




ATTACHMENT TO
CERTIFICATE No. MED410724CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****