Materials/Components
Data communication cable , flame retardant, halogen free, for fixed installations in marine and offshore units.
Rated voltage: 300 V
Type: Cat. 5e, Cat.5e fire resistant, Cat. 6, Cat.7, Cat.7A, PROFINET
Marking:
- UNIKA (Italy) SH-DATA/SHFx – ETHERNET CABLE “Cat.5e or Cat.6 or Cat.7 or Cat 7A”– (pair number) x (cross-section) – IEC 60332-3-22 – traceability code - meter marking
- UNIKA (Italy) SH-DATA/SHFx – ETHERNET CABLE Cat.5e Fire resistant – (pair number) x (cross-section) – IEC 60332-3-22 – EN 50200 EN 50289-4-16 PH120 100 MHz - traceability code - meter marking
- UNIKA (Italy) SH-DATA/SHFx – PROFINET CABLE Cat.5e (pair or quad number) x (cross-section) – IEC 60332-3-22 – traceability code - meter marking
SH-DATA/SHF1 : with SHF1 sheath according IEC 60092-360
SH-DATA/SHF2 : with SHF2 sheath according IEC 60092-360 with enhanced oil and drilling fluid resistance and low temperature
Construction:
Conductor: bare or tinned copper conductor (IEC 60228 Class 1, class 2 or class 5)
Insulation: PE foam-skin or PE
Pairs: cores are stranded in pairs (not Profinet version)
Cable lay up: pairs are stranded together (as a quad for Profinet version)
Inner sheath (optional): halogen free compound
Global shielding: plastic coated aluminium tape covered by a tinned/bare copper braid
Sheath: SHF1 or SHF2
Armour (optional): galvanized steel wire braid
Sheath over armour (optional): SHF1 or SHF2
In accordance to rules IEC 60228 cl.2; IEC 60092-350; IEC 61156-5; IEC 61156-6; EN 50288; IEC 60332-1-2; IEC 60332-3-22; IEC 60754-2; IEC 61034-1; IEC 61034-2; EN 50200, EN 50289-4-16, RINAMIL Rules; RINAMIL for FREMM; RINA Rules for FRSU.
Technical specification:
Datasheet n° RY100, RY101, RY102, RY104
Minimum installation temperature: -15°C (-40°C with SHF2 sheath, according IEC 60092-350 ann.E)
Drilling fluid resistance according to IEC 60092-360 tab.9-10 with SHF2 sheath.
Tests Report::
IMQ N. CN 16-0003560-01 dated 2017/02/31; IMQ N. CN 16-0003561-01 dated 2017/02/31
CSI N. 0905/DC/REA/16_1 dated 11/11/2016; CSI N. 0905/DC/REA/16_2 dated 11/11/2016
CSI N. 0905/DC/REA/16_3 dated 11/11/2016; CSI N. 0088/DC/TOK/16_1 dated 11/11/2016
CSI N. 0088/DC/REA/16_2 dated 11/11/2016
Note:
Components to be used according to the instructions given by the manufacturer.
The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates
Type Approval certifies that a rappresentative sample of the products has been found to meet the applicable design criteria
Any modification of change shall not be valid until approval is granted by RINA as a result of due assessment. |
|