Double leaf hinged door whose maximum clear opening size is 2214 mm wide and 2200 mm high. The primary leaf has maximum width of 1502 mm and maximum height of 2217 mm; the secondary leaf has maximum width of 752 mm and maximum height of 2217 mm. The door leaves, having thickness of 50 mm, are composed of two carbon steel sheets, 1.2 mm thick each and, in between, the insulating material compound. This compound is composed of a mineral wool layer having thickness of 35 mm type SEAROX SL 970 (density of 115 kg/m3) or type PAROC MARINE SLAB 120 (density of 120 kg/m3) and a layer of material named PROMAGLAF GM, 12.6 mm thick and having density of 150 kg/m3. The insulating materials are glued together and to the steel sheets by means of 250 g/m2 of adhesive type DUNAPOL AD1670. The primary leaf is fitted, in the middle, with two C shaped steel stiffeners, 1.2 mm thick and having dimensions of 60x15 mm welded, symmetrically to the two steel sheets, on the upper and lower part of the leaf. The secondary leaf is equipped with a lever closing device, which acts on two points, fitted inside the leaf and actuated by a handle. The primary leaf may be fitted with a circular window having diameter of 360 mm. The window, having overall thickness of 45 mm, is composed starting from the fire exposed side of a glass type VETROTECH CONTRAFLAM MARINE A60 27 mm thick, an air gap 8 mm thick and a monolithic glass 10 mm thick. The window frame, composed of steel profiles 5 mm thick, is fixed to the leaf by means of M6 bolts and it is completed with strips of insulating material type FORSTER KERAFIX 15x3 mm and silicone type FIRESTOP 700. The door frame is composed of an S shaped steel profile having thickness of 5 mm, bolted to the bulkhead by means of M8 bolts. The door may be fitted with a self closing hose port having maximum dimensions of 160 x 188 mm.
|
ATTACHMENT TO
CERTIFICATE Nr. MED275322CS/002
Page 2 of 3 |
Fire resistant A-30 Class double leaf hinged door.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame design
Naval Suppliers drawing No. FT_PA6ZI_242215_ASM_R1 dated 4 April 2017 approved with endorsement No. LABS-1458 on 2 May 2017.
Test as per RINA Test Laboratory report No. 2017CS01698/1 issued on 18 May 2017 according to IMO 2010 FTP Code. |