MED303724CSENG- -  -  N- BOLTED HINGED DOOR NEW 50 A30 -N- S- S- -03/12/2024- Marine Equipment- - SN- S- - N-  - 244,549B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED303724CS- N-Dec 2, 2029244549
 
Form
  Marine Equipment(TO)
Certification N. MED303724CS - (ENG)
Certificate date 03/12/2024
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
BOLTED HINGED DOOR NEW 50 A30
Applicant NAVAL SUPPLIERS SRL Unipersonale
Place of requester ZONA INDUSTRIALE 24  %  33049 San Pietro Al Natisone (UD)  % ITALY
Tel. N.,Fax, Email +39 0432 727860, +39 0432 727886, firedoors@navalsuppliers.com
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference Documents SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511
Request 27/11/2024
Expire date 02/12/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED303724CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type BOLTED HINGED DOOR NEW 50 A30
Applicant NAVAL SUPPLIERS SRL Unipersonale
ZONA INDUSTRIALE 24,33049 San Pietro Al Natisone (UD),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference standards SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511
Issued in Genoa on
This Certificate is valid until
December 3, 2024
December 2, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED303724CS
Page 1 of 3

Product description

Single leaf hinged door whose maximum clear opening size is 1050 mm wide and 2050 mm high. The door leaf, having maximum width of 1099 mm, maximum height of 2071 mm and thickness of 50 mm, is composed of two carbon steel sheets, 1.2 mm thick each and, in between, the insulating material. This material is composed, starting from the hinges side, of one layer of material named Promat Promaglaf GM having nominal thickness of 12.6 mm and nominal density of 165 kg/m3 and one mineral wool layer type Rockwool Searox SL970, having nominal thickness of 35 mm and nominal density of 115 kg/m3. The insulating material are glued to the steel sheets by means of 250 g/m2 of adhesive type Promat Kleber K84. The leaf is fitted, on the perimeter, with C-shaped stainless steel profile, 1.2 mm thick and having dimensions of 52.4x15 mm. The leaf is also fitted with a vertical stiffener composed of a double M-shaped steel profile having dimensions of 74x18 mm and thickness of 2 mm, placed at 220 mm from the edge of the leaf lock side and glued to the steel sheets by means of 140 g of adhesive type Collanti Concorde Isobond No Fire.
The door frame is composed of a U-shaped steel profile, 3 mm thick and having dimensions of 40x95 mm, screwed to the bulkhead. The sill, that constitutes the fourth side of the door frame, is composed of two C-shaped steel profiles 3 mm thick, screwed to the bottom. The door frame is screwed to a side frame composed of a L-shaped steel profile 4 mm thick appropriately shaped. The door frame and the side frame are insulated, on the exposed side, with two layers of mineral wool named Rockwool SEAROX SL970 having nominal thickness of 48 mm and 35 mm and nominal density of 115 kg/m3.
The door is fitted, on the upper corner lock side, with a thermal bolt.
The door may be fitted with a 1.2 mm thick stainless steel self-closing hose port having maximum dimensions of 160x189 mm, insulated with a layer of mineral wool named Rockwool SEAROX SL970 having nominal thickness of 48 mm and nominal density of 115 kg/m3.


Field of application
Fire resistant A-30 Class single leaf hinged door with fire hazard on the side opposite to the hinges.

In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- maximum door size tested;
- door used with a fire tested frame design.

The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.
Reference documents
Naval Suppliers drawing No. FT_HBA62_1050x2050 Rev. 01 dated 21 November 2024 enclosed to RINA Test Laboratory Report No. 2024CS013037/2.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2024CS013037/2 issued on 3 December 2024 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED303724CS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****