MED493326WSENGD- -  -  N- JYBHK-85N -N- S- S- -28/08/2026- Marine Equipment- - SN- S- - N-  - 190,533B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED493326WS- N-Aug 27, 2031190533
 
Form
  Marine Equipment(TO)
Certification N. MED493326WS - (ENG)
Certificate date 28/08/2026
Type Mezzi di salvataggio
Product Release mechanism for: (a) lifeboats and rescue boats (launched by a fall or falls)
Item Nº MED/1.26a

Model or Denomin.
Items
JYBHK-85N
Applicant JIANGYINSHI BEIHAI LSA CO., LTD.
Place of requester 58# Baima Road, Yuecheng Town% Jiangyin Jiangsu % CHINA
Tel. N.,Fax, Email 008651086987828, 008651086986869, jybeihai2006@163.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.81 (70) as amended
Reference Documents SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/16, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) IV, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1419, IMO MSC.1/Circ.1630 Rev 2.
Expire date 27/08/2031
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Ai Nian Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED493326WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.26a
Description Release mechanism for: (a) lifeboats and rescue boats (launched by a fall or falls)
Type JYBHK-85N
Applicant JIANGYINSHI BEIHAI LSA CO., LTD.
58# Baima Road, Yuecheng Town,Jiangyin Jiangsu,CHINA
Testing standards IMO Res. MSC.81 (70) as amended
Reference standards SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/16, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) IV, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1419, IMO MSC.1/Circ.1630 Rev 2.
Issued in SHANGHAI on
This Certificate is valid until
August 28, 2026
August 27, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Ai Nian Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED493326WS
Page 1 of 2


TECHNICAL DATA
- Hook release mechanism with SWL of 85 kN.
- Hanging-off load of 8500 kg.
- The mechanism with two release capabilities: normal (off-load) release capability and on-load release capability.
- A hydrostatic interlock is provided which may automatically reset upon lifting the boat from the water.
- Movable hook component with thickness of 60 mm.
- Hook with inner circle radius of 32 mm.
- Each hook assembly connected with lifeboat by 8 bolts.
- Hook release mechanism shall not be used on High Speed Craft.
- Hook release mechanism shall be used for Totally Enclosed Lifeboat only.
- Hook release mechanism is in compliance with IMO Res. MSC.48(66), as amended by Resolution MSC.320(89).
- Hook release mechanism is in compliance with IMO LSA code, as amended by Resolution MSC.554(108).


REFERENCE DOCUMENTS
Appr. Dwg. Title
SHST-13124 Release Mechanism JYBHK-85N


TESTS CARRIED OUT

Release mechanism has been tested on 9/July/2013 in compliance with IMO Res. MSC.48(66), as amended and

IMO Res. MSC.81(70), as amended by Resolution MSC.321(89).





ATTACHMENT TO
CERTIFICATE No. MED493326WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Ai Nian Zhang
**** NOTICE: This is NOT an official certificate ****