MED124926CSENGF- -  -  N-  Bussola Mod. 150 -N- S- S- -26/03/2026- Marine Equipment- - SN- S- - N-  - 81,162B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED124926CS- N-Mar 25, 203181162
 
Form
  Marine Equipment(TO)
Certification N. MED124926CS - (ENG)
Certificate date 26/03/2026
Type Apparecchi di navigazione
Product Magnetic compass Class A for ships
Item Nº MED/4.1
USCG Category N° 165.101

Model or Denomin.
Items
Bussola Mod. 150
Applicant DITTA FUSELLI DI F.LLI FASSIO S.r.l.
Place of requester P.ZZA CAVOUR 16/B (ANGOLO VIA DELLE GRAZIE 2 R)  %  16128 Genova (GE)  % ITALY
Tel. N.,Fax, Email 010 2472472, 010 2472604, info@fusellifassio.it
Directive (EU) 2025/1533
Standards ISO 1069:1973, ISO 25862:2019 incl. A1:2024, IEC 60945:2002 incl. IEC 60945 Corr. 1:2008.
Reference Documents SOLAS 74 Reg. V/19, IMO Res.A.382(X), IMO Res.A.694(17), IMO Res.MSC.36(63)-(1994 HSC Code) 13, IMO Res.MSC.97(73)-(2000 HSC Code) 13, IMO Res.MSC.302(87).
Request 25/05/2020
Expire date 25/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Davide Campora S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED124926CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Navigation Equipment requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/4.1
USCG Category Nº 165.101
Description Magnetic compass Class A for ships
Type Bussola Mod. 150
Applicant DITTA FUSELLI DI F.LLI FASSIO S.r.l.
P.ZZA CAVOUR 16/B (ANGOLO VIA DELLE GRAZIE 2 R),16128 Genova (GE),ITALY
Testing standards ISO 1069:1973, ISO 25862:2019 incl. A1:2024, IEC 60945:2002 incl. IEC 60945 Corr. 1:2008.
Reference standards SOLAS 74 Reg. V/19, IMO Res.A.382(X), IMO Res.A.694(17), IMO Res.MSC.36(63)-(1994 HSC Code) 13, IMO Res.MSC.97(73)-(2000 HSC Code) 13, IMO Res.MSC.302(87).
Issued in Genoa on
This Certificate is valid until
March 26, 2026
March 25, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Fabio Morbioni
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED124926CS
Page 1 of 2

Product description



Magnetic compass class A with the following main components:
- Liquid compass type. Liquid used: 60% distilled water and 40% alcool
- Brass made compass bowl with glass in the upper and lower part.
- Compass card diameter:150mm
- Directional system: 2 magnets Ø 7mm per 50mm long each 650 Oersted coercivity.
- Pivot bearing; syntetic sapphire.
Magnetic moment : 2.0 Am²
The compass may be used with the following binnacle:
Type FF3 (Class A2 type):
- Reflection type
- Material: glass reinforced plastic
- Material of periscope: PVC
- External diameter 310 mm, total height: 640 mm (cup included)
Reference documents

Datasheet and technical description magnetic compass with binnacle FF3 - issued by F.Fuselli and approved
by RINA with n° CSST25834 and CSST25898.
Compass mod.150 & binnacle FF3 maximum dimensions , issued by F.lli Fassio S.n.c. and approved by RINA with n° CSST25833;
Compass mod.150 - Layout - dwg n° 001, issued by F.lli Fassio S.n.c. and approved by RINA with n° CSST25859;
Binnacle type FF3 - Layout - dwg n° 001, issued by F.lli Fassio S.n.c. and approved by RINA with n° CSST25858;
Azimuth reading device, dwg n° 200401, issued by F.lli Fassio S.n.c. and approved by RINA with n° CSST25857.
Tests carried out

Reports n° 04/CS/410/01 witnessed and filed by RINA on December 15, 2004;
Test temperature cycles binnacle FF3 - Report n° 2004CS01409 issued by RINA Laboratory on January 25, 2005;
Report n° 2025CS013712 issued by RINA Laboratory and filed with n° CSST25835;
Report n° 2026/ GE/01/154 witnessed and filed by RINA with n° CSST25841.
Remark
Final acceptance of the installation on board is subject to the verifications to be made by a compensating expert to ascertain the compass safe distance from all equipment that can cause electromagnetic interferences or produce magnetic deviation.
This certificate annuls and replaces the certificate No. MED181220CS/001 dated 06/26/2020 due to certificate expiration.




ATTACHMENT TO
CERTIFICATE No. MED124926CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Fabio Morbioni
**** NOTICE: This is NOT an official certificate ****