ENGGS26/09/2006
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED130406PU/001
Certificate date 9/26/06
Type Mezzi di salvataggio
Directive 2002/75/EC
Product Dispositivi per la messa a mare dotati di paranchi e verricelli
Item Nº A.1/1.21
Model Life boat davit, gravity type
Identification YNBD(W) 0520-01 - Intended for SLS Hull No. 451 - RI 82445
Manufacturer YOUNGNAM MACHINERY CO.,LTD
Tel. N.,Fax, Email +82 52 257 8171, ---, ---
Place of production 357 GOYUN-RI WOONGCHON % MYUN ULJU-KUN ULSAN % KOREA, REPUBLIC OF
Tel. N.,Fax, Email +82 52 257 8171, ---, ---
Applicant YOUNGNAM MACHINERY CO.,LTD
Place of requester 357 GOYUN-RI WOONGCHON % MYUN ULJU-KUN ULSAN % KOREA, REPUBLIC OF
Tel. N.,Fax, Email +82 52 257 8171, ---, ---
Standards Regulation III/23,Regulation III/33,Regulation III/34, IMO Resolution MSC.48(66), IMO Resolution MSC.81(70)
Surveyor Sung- Ki Yang
Head Office PUSAN


RINA
Società per azioni
Via Corsica, 12 - 16128 Genova
Tel +39 010 53851
Fax +39 010 5351000

EC MARINE EQUIPMENT UNIT VERIFICATION (MODULE G)
CERTIFICATE Nr.  MED130406PU/001

This is to certify,
that RINA, specified as Notified Body Nº 0474 by the Italian "Ministero delle Infrastrutture e dei Trasporti Direzione Generale per la navigazione ed il Trasporto Marittimo ed Interno" on 25 November 1998, did undertake the relevant type approval procedures for the equipment identified below which was found to be in compliance with the Life-Save Appliances requirements of Marine Equipment Directive (MED) 96/98/EC as modified by Directive 2002/75/EC
MED Item Nº A.1/1.21
Description Launching appliances using fall and winch (davits)
Model Life boat davit, gravity type
Identification YNBD(W) 0520-01 - Intended for SLS Hull No. 451 - RI 82445
Applicant YOUNGNAM MACHINERY CO.,LTD
357 GOYUN
RI WOONGCHON
MYUN ULJU
Testing standards Regulation III/23,Regulation III/33,Regulation III/34, IMO Resolution MSC.48(66), IMO Resolution MSC.81(70)
    
Issued at Busan 
on September 26, 2006

This Certificate consists of this sheet plus an attachment
On the basis of the conditions stated in Article 11 of the Marine Equipment Directive (MED) 96/98/EC, this certificate allows the Manufacturer to affix the following symbol on the equipment above identified
0474 /06
 

________________________________________
RINA - Responsabile CTC (for review)
RINA
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED130406PU/001
Manufacturer:
YOUNGNAM MACHINERY CO.,LTD
Address
357 GOYUN
RI WOONGCHON
MYUN ULJU

Verified components of the equipment (with serial number)
YNBD(W) 0520-01 - Intended for SLS Hull No. 451 - RI 82445
Technical documentation
Drawing approval no. STR-008427 dated 20 October 2005
RINA assesment Report no. 06PUCO1304

Limitation on the acceptance or use of the product

____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA - Responsabile CTC (for review)
RINA
RINA
Società per azioni
Via Corsica, 12 - 16128 Genova
Tel +39 010 53851
Fax +39 010 5351000
**** NOTICE: This is NOT an official certificate ****