ELE182424XGENG- -  -  N- Multifunction Monitoring System (MMS) -N- S- S- -04/09/2024- Prodotti Elettrici- - SN- N- Giuseppe Russo- N-  - 736,608Giuseppe RussoBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE182424XG- N-Sep 3, 2029736608
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE182424XG - (ENG)
Certificate date 04/09/2024
Type Impianti di Automazione
Product Sistema di sicurezza, comando e monitoraggio motori diesel

Model or Denomin.
Items
Multifunction Monitoring System (MMS)
Applicant MAN Energy Solutions SE
Place of requester STADTBACHSTRASSE 1  %  D-86153 Augsburg  % GERMANY
Tel. N.,Fax, Email 0049 821 322 4396, 0049 821 322 494396, dominik.leitz@man-es.com
Standards Rules for the Classification of Ships - Part C - Machinery Systems and Fire Protection,Ch. 3,Sec. 8, Table 1
Expire date 03/09/2029
Head Office HAMBURG
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE182424XG
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Diesel engine safety, control and monitoring system
Type Multifunction Monitoring System (MMS)

Applicant MAN Energy Solutions SE
STADTBACHSTRASSE 1
D-86153 Augsburg
GERMANY
Reference standards Rules for the Classification of Ships - Part C - Machinery Systems and Fire Protection,Ch. 3,Sec. 8, Table 1
  

 
 
   .   This Certificate is valid until September 3, 2029
_________________________________
RINA Services S.p.A.
Giuseppe Russo
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE182424XG
Enclosure - Page 1 of 1
Multifunction Monitoring System (MMS)
Product description:
The Multifunction Monitoring System (MMS) is an independent monitoring system for internal combustion engines. The MMS system application is an add-on system to engines safety and alarm systems for both, MAN Diesel systems and systems of third party manufacturers for marine propulsion, genset and offshore applications. The system can be configured in three different extension stages by combination of type approved SaCoSone Control Module, Display Module and the optional Gateway Module.

Main Monitoring Functions (e.g.):
 Splash Oil Monitoring
 Main Bearing Monitoring
 Crank Case Pressure Monitoring
 Oil Mist Detector Interfacing
 Cam shaft gear bearing temperature Monitoring
 Exhaust gas temperature Monitoring

1. “Add on” extension stage
Components:
1x SaCoSone Control Module (CM)
Application: as an extension to an existing “engine” SaCoSone system.

2. “Standard” extension stage
Components:
1x SaCoSone Control Module (CM),
1x SaCoSone Display Module (DM)
Application: as a stand-alone system.

3. “Maximum” extension stage
Components:
1x SaCoSone Control Module (CM),
1x SaCoSone Display Module (DM),
1x SaCoSone Gateway Module (GM)
Application: as a stand-alone system and with interface to MAN Diesel EDS – System or other systems via MODbusTCP and MODbusRTU

Documents:
- MMS System Requirements Specification Rev. 1.2 dated 20.08.2018; MMS Power Supply Arrangement dated 12.01.2017;
- MMS Installation and Operating Manual Rev. 1.0 dated 2017-02-16;
- MMS Commissioning Procedure Rev. 2 dated 26.09.2018;
- DRW11991007750 Rev. D dated 03.10.2018; MMS Revision History Rev. 1.1 dated 26.06.2018;

Test reports:
- Software Type Test MMS 1.1.0 dated 13.12.2018

Remarks:
- Drawings of each system configuration is to be sent for approval before installation on board.
- The power supply requirements acc. to RINA Rules Pt C; Ch 3; Sec 2 is to be considered by the system integrator.
- In case of major software modification detailed information and suitable documents are to be submitted to the Society.

HAMBURG September 4, 2024
**** NOTICE: This is NOT an official certificate ****