MED479825CS!001ENG- -  -  N- Skamo Marine Panel Board 250 - A15 -N- S- S- -22/10/2025- Marine Equipment- - SN- S- - N-  - 704,840B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED479825CS/001- N-Oct 21, 2030704840
 
Form
  Marine Equipment(TO)
Certification N. MED479825CS/001 - (ENG)
Certificate date 22/10/2025
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a
USCG Category N° 164.107

Model
Items/Sizes
Skamo Marine Panel Board 250 - A15
Applicant Promat Research and Technology Centre - PROMAT RESEARCH AND TECHNOLOGY CENTRE
Place of requester BORMSTRAAT 24  %  2830 Tisselt  % BELGIUM
Tel. N.,Fax, Email +32 15 71 82 70, ---, invoices.be@etexgroup.com
Directive (EU) 2025/1533
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1435
Reference Documents SOLAS 74 Reg. II-2/3.2,SOLAS 74 Reg. II-2/9,IMO Circ. MSC 1120,IMO Circ. MSC.1 1434,IMO Circ. MSC.1 1616,IMO Circ. MSC.1 1621
Request 21/10/2025
Validity 21/10/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED479825CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11a
USCG Category Nº 164.107
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type Skamo Marine Panel Board 250 - A15
Applicant Promat Research and Technology Centre - PROMAT RESEARCH AND TECHNOLOGY CENTRE
BORMSTRAAT 24,2830 Tisselt,BELGIUM
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1435
Reference standards SOLAS 74 Reg. II-2/3.2; SOLAS 74 Reg. II-2/9; IMO Circ. MSC 1120; IMO Circ. MSC.1 1434; IMO Circ. MSC.1 1616; IMO Circ. MSC.1 1621
Issued in Genoa on
This Certificate is valid until
October 22, 2025
October 21, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED479825CS/001
Page 1 of  2

Product description

Bulkhead with overall maximum dimensions of 2440 mm in width and 2475 mm in height, composed of calcium silicate panels type SkamoMarinePanel Board 250. The panels, having maximum dimensions of 1214x2407 mm (WxH), thickness of 25 mm and nominal density of 250 kg/m3, are joined by means of key/groove joints glued with Sikaflex 591.
The bulkhead is fitted, on the perimeter, with U and double-L shaped steel profiles fixed to the bottom, top and sides, having thickness of 1 mm.
Field of application
Fire resistant A-15 Class lightweight bulkhead intended for general applications.

The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.
Reference documents
Drawings included in DBI Fire and Security Test Report No. PGB10027A dated 1 July 2020.
Tests carried out
Tests as per DBI Fire and Security Test Report No. PGB10027A issued on 1 July 2020 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED479825CS/001
Pages 2 of  2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****