The Fire-fighters outfit - lifeline (Type: HONHS), shall be capable of being attached by means of a snap-hook to the harness of the apparatus or to a separate belt in order to prevent the breathing apparatus becoming detached when the lifeline is operated.
Design:
- Lifeline consists of steel wire (6 x 19, core 5~5.2 mm), of minimum 30 meters in length, with a strength of 3.5 KN for 5 min without failure;
- It is ended by snap-hook at each side.
Material specification:
- Wire: 304 Stainless steel;
- Hear Wire Harness: 1Cr18Ni9Ti;
- Snap-hook: 1Cr18Ni9Ti.
Reference Documents
The design assessment is based on IMO Res. MSC.98(73)-(FSS Code) 3.) with following documents issued by Dongtai City Haiou Navigation Equipment Co., Ltd:
- Technical Drawing, approved by RINA with No.: SHFP-19446;
- Technical Specification, approved by RINA with No.: SHFP-20355;
- Instruction Manual, filed by RINA with No.: SHFP-19441;
- Bill of Material, approved by RINA with No.: SHFP-20354.
Tests carried out
The required static load test of 3.5 KN for 5 min as per IMO Resolution MSC.98(73) Chapter 3.2.1.3 (FSS Code) was carried out under the supervision of RINA, the report is filed by RINA with No.: SHFP-19448.
Note: Material of fireman safety line (304 stainless steel) is considered as non-combustible as specified in IMO Res. MSC.61(67)-FTP Code, Annex 2, Part 1.
 | ATTACHMENT TO
CERTIFICATE No. MED337321WS/002 Page 2 of 3 |
Continued:Field of Application / Limitation
Approved for use as fireproof lifelines for firefighter's outfit.
Each lifeline is to be supplied with its instructions for use, inspection and on-board maintenance complying with Regulations stated on the front page of this certificate. These instructions are to be kept on board.