Technical Characteristics
FOAM CONCENTRATE Fomtec P 3% AR |
| Mixing Ratio | 3 | % |
| Specific Gravity at 20°C | 1,075 ± 0,015 | g/ml |
| Viscosity at 20ºC | ≤ 2300 | mPa·s |
| PH at 20ºC | 6,8 ± 0,8 | - |
| Expansion Ratio at 20ºC | ≥ 4,0 | - |
| Drainage Time 20°C | ≥ 5:00 | minutes |
| Minimum temperature for use | -5 | °C |
| Maximum temperature for use | +55 | °C |
This approval does not address the foam generating equipment, only the foam concentrate.
Fixed foam fire extinguishing systems using low expansion foam concentrate for extinguishing fires of following products at ambient temperature and pressure:
- Chemical Products as per list of Chapter 17, International Bulk Chemical Code (Column L - Letters A, B and D);
- Chemicals to which the IBC Code nor the BCH Code apply as per list set out in IMO Circular MSC/Circ. 553.
Technical Documentation
Technical Specification – Fomtec P 3% AR filed by RINA with n° PLFP/772
TDS - Fomtec P 3% AR filed by RINA with n° PLFP/771
Tests Carried Out
According to IMO MSC.1/Circ.1312 & MSC.1/Circ.1312/Corr.1- "Revised guidelines for the performance and testing criteria, and surveys of foam concentrates for fixed fire-extinguishing systems", Test report filed by RINA with n° PLFP-769
Note
The foam concentrate should be delivered with a declaration (i.e. Batch Certificate) of the main characteristics (sedimentation, pH value, expansion ratio, drainage time and volumetric mass). The declaration will be the basis for the annual condition test.
The storage container should be compatible with the foam concentrate throughout the service life of the foam