ELE225724XGENG- -  -  N- QT80-Ti, QT130, QTE140, QTS75, QTS100 -N- S- S- -29/11/2024- Prodotti Elettrici- - SN- N- Giuseppe Russo- N-  - 1,242,514Giuseppe RussoBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE225724XG- N-Nov 28, 20291242514
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE225724XG - (ENG)
Certificate date 29/11/2024
Type Impianti Elettrici
Product Underwater Light

Model or Denomin.
Items
QT80-Ti, QT130, QTE140, QTS75, QTS100
Applicant Underwater Lights Ltd
Place of requester The Great Dunton Forge, London Road  %  TN13 2TD Dunton Green  % UNITED KINGDOM
Tel. N.,Fax, Email ---, ---, klare@underwaterlights.com
Standards IEC60529 Ed. 2.2 (2013-08)
Expire date 28/11/2029
Head Office HAMBURG
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE225724XG
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Underwater Light
Type QT80-Ti, QT130, QTE140, QTS75, QTS100
Applicant Underwater Lights Ltd
The Great Dunton Forge, London Road
TN13 2TD Dunton Green
UNITED KINGDOM
Reference standards IEC60529 Ed. 2.2 (2013-08)
  

 
 
   .   This Certificate is valid until November 28, 2029
_________________________________
RINA Services S.p.A.
Giuseppe Russo
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE225724XG
Enclosure - Page 1 of 1
QT80-Ti, QT130, QTE140, QTS75, QTS100
Product description:
These Underwater Lights are certified as watertight appliances for use in the hull of Rina classed vessels, covering pressure of the Underwater Light body for installation in aluminium or steel structures.

Main characteristics:
Please refer to manufacturer's technical documentation



Documents:
QT-80-Ti DRAWINGS
QT-130 DRAWINGS
QTE-140 DRAWINGS
QTS-75 DRAWINGS
QTS-100 DRAWINGS

Test reports:
PRJ11100429223 Pressure Test Certificate QTE-140 (pressure from outside)
PRJ11100429223/1 Pressure Test Certificate QTE-140

Remarks:
- The mounting location and details remain subject to examination and approval for each individual project and are to be submitted prior to installation.
- The operation of the lights is limited to the (permanently) submerged condition of the lens.
- The manufacturer's recommendations and instructions regarding location and operation must be observed.
- The materials as given in the drawings are acceptable, provided the material is suitable for the hull in which the appliance is fitted. Aluminium materials must be coated with corrosion protection in addition.
- The degree of protection provided by enclosure is IP X8.

HAMBURG November 29, 2024
**** NOTICE: This is NOT an official certificate ****