MED087024CSENGD- -  -  N- RUBBER FLOOR -N- S- S- -05/03/2024- Marine Equipment- - SN- S- - N-  - 1,230,760B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED087024CS- N-Mar 4, 20291230760
 
Form
  Marine Equipment(TO)
MED008324WS
Certification N. MED087024CS - (ENG)
Certificate date 05/03/2024
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Item Nº MED/3.18c
USCG Category N° 164.117

Model or Denomin.
Items
RUBBER FLOOR
XDR FLOOR
Applicant Shenzhen Xunda Vessel Materials Co., Ltd.
Place of requester Room 2805, Southern Security Building A, No.2016¿2018 Jianshe Road, Jiabei Community, Nanhu Street, Shenzhen (Guangdong)  % CHINA
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2023/1667
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 23/12/2023
Expire date 04/03/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED087024CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.18c
USCG Category Nº 164.117
Description Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Type RUBBER FLOOR
XDR FLOOR
Applicant Shenzhen Xunda Vessel Materials Co., Ltd.
Room 2805, Southern Security Building A, No.2016¿2018 Jianshe Road, Jiabei Community, Nanhu Street, Shenzhen (Guangdong),CHINA
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
March 5, 2024
March 4, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED087024CS
Page 1 of 2

Product description



Rubber flooring (black color).
  • Mass per area (kg/m2): 16.3
  • Thickness (mm): 10


Field of application

As floor covering.

The product may be applied to any non-combustible (non metallic) support having a thickness ³ 12 mm and a density ³ 712.5 kg/m3.

Tests carried out

Tests as per SGS Test Laboratory reports No. SDFS2401000217FF and No. SDFS2401000218FF dated 22 January 2024 issued according to:
  • IMO 2010 FTP Code Part 5
  • IMO 2010 FTP Code Part 2




ATTACHMENT TO
CERTIFICATE No. MED087024CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****