MED479421CSENGD- -  -  N- "GMFD" GIANNESCHI MARINE FIRE DAMPER -N- S- S- -27/01/2022- Marine Equipment- - SN- S- - N-  - 376,050B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED479421CS- N-Jan 26, 2027376050
 
Form
  Marine Equipment(TO)
MED058624SP
Certification N. MED479421CS - (ENG)
Certificate date 27/01/2022
Type Protezione antincendio
Product Sbarramenti antincendio
Item Nº MED/3.22
USCG Category N° 164.139

Model
Items/Sizes
"GMFD" GIANNESCHI MARINE FIRE DAMPER
Applicant GIANNESCHI PUMPS AND BLOWERS S.R.L.
Place of requester VIA LUIGI GIANNESCHI 270  %  55040 Capezzano Pianore (LU)  % ITALY
Tel. N.,Fax, Email 0584365101, 0584 969411, info@gianneschi.net
Directive (EU) 2021/1158
Standard IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 29/11/2021
Validity 26/01/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED479421CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.22
USCG Category Nº 164.139
Description Fire dampers
Type "GMFD" GIANNESCHI MARINE FIRE DAMPER
Applicant GIANNESCHI PUMPS AND BLOWERS S.R.L.
VIA LUIGI GIANNESCHI 270,55040 Capezzano Pianore (LU),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
January 27, 2022
January 26, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED479421CS
Page 1 of 3





Product description

Monoblade and multiblade fire dampers having sizes ranging from 100 x 100 mm up to 1130 x 1130 mm. The damper frame is composed of stainless steel sheets, 2 mm thick whereas the blades, having width ranging from 90 up to 145 mm, are composed of stainless steel sheets, 1.5 mm thick. The coamings are insulated with one layer of mineral wool panels (certified non combustible in conformity to the IMO FTP Code), 60 mm thick and having density of 100 kg/m3. The insulating panels, secured to the coamings with steel pins and washers, welded with pitch of 250 mm, are to be applied for the following total coaming lengths:
  1. Damper installed on decks: 750 mm
  2. Damper installed on bulkheads:
  • from damper size of 100 x 100 mm up to size of 300 x 300 mm: 750 mm
  • for damper size greater than 300 x 300 mm up to 1130 x 1130 mm: the length is to be calculated with the formula L= 0.3301X + 673.08 where L is the length of the insulation on the coaming and X is the dimension of the longer side of cross sectional area of duct

Field of application

Fire resistant A-60 Class fire dampers fitted on decks and bulkheads.







 



ATTACHMENT TO
CERTIFICATE Nr. MED479421CS
Page 2 of 3

Reference documents

Gianneschi Pumps and Blowers Srl drawings as per following table:

No.
Item
Rev.
Date
No. of RINA endorsement
Date of
endorsement
BTS01
Bulkhead A60 and fire dampers
01
04/02/2011
LABS-534
11/3/2011
26TG00113X113
Gianneschi Marine Fire Damper Internal size 1130 x 1130 mm (7 sheets)
02
11/02/2011
LABS-535
11/3/2011
26TG0010X15
Gianneschi Marine Fire Damper Internal size 100 x 150 mm (5 sheets)
02
8/02/2011
LABS-536
11/3/2011
26TG20113X85
Gianneschi Marine Fire Damper Blade
02
16/01/2011
LABS-537
11/3/2011
BTS01
Bulkhead A60 and fire dampers
02
21/06/2011
LABS-576
25/7/2011
26TG0085X85
Gianneschi Marine Fire Damper Internal size 850 x 850 mm (7 sheets)
03
21/06/2011
LABS-577
25/7/2011
26TG0010X10
Gianneschi Marine Fire Damper Internal size 100 x 100 mm (4 sheets)
03
21/06/2011
LABS-578
25/7/2011
DTS01
Deck A60 and fire dampers
01
23/11/2011
LABS-610
16/12/2011
26TG00113X113
Gianneschi Marine Fire Damper Internal size 1130 x 1130 mm (7 sheets)
02
11/02/2011
LABS-611
16/12/2011
26TG0010X10
Gianneschi Marine Fire Damper Internal size 100 x 300 mm (4 sheets)
04
14/12/2011
LABS-612
16/12/2011
INST01
Damper fitted on bulkhead or deck A60 partition - Coaming length according to internal cross sectional area
01
24/01/2012
LABS-624
27/1/2012
26SBFN01
Spring-return actuator BFN24-T, combined with thermoelectric tripping device BAT (72°C)
A
28/02/2017
LABS-1448
6/4/2017

Tests carried out

Tests as per RINA Test Laboratory Report No. 2010CS014217/1 dated 11 march 2011, No. 2011CS012275 dated 25 July 2011 and No. 2011CS012275/1 dated 19 december 2011 issued according to IMO Res. A.754(18) Appendix A.II. and to the RINA thermal-mechanical analysis report TR No. 2012/001/TCHD dated 23 January 2012.




ATTACHMENT TO
CERTIFICATE No. MED479421CS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****