MED169825CSENG- -  -  N- E34TEK90 E34CUTEK90 E34PATEK E34SAG90  -N- S- S- -23/06/2025- Marine Equipment- - NN- S- - N-  - 2,341,740B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED169825CS- N-Jun 22, 20302341740
 
Form
  Marine Equipment(TO)
Certification N. MED169825CS - (ENG)
Certificate date 23/06/2025
Type Protezione antincendio
Product Materiali non combustibili
Item Nº MED/3.13
USCG Category N° 164.109

Model
Items/Sizes
E34TEK90  E34CUTEK90  E34PATEK  E34SAG90
Applicant TEKNOWOOL HOLDING S.R.L.
Place of requester Via Emilio Caldara 20  %  20122 Milano (MI)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2024/1975
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. X/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/9, IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC Code) 7
Request 31/03/2025
Validity 22/06/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED169825CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.13
USCG Category Nº 164.109
Description Non-combustible materials
Type E34TEK90  E34CUTEK90  E34PATEK  E34SAG90
Applicant TEKNOWOOL HOLDING S.R.L.
Via Emilio Caldara 20,20122 Milano (MI),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. X/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/9, IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC Code) 7
Issued in Genoa on
This Certificate is valid until
June 23, 2025
June 22, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED169825CS
Page 1 of 3

Product description

The products E34TEK90, E34PATEK, E34CUTEK90 and E34SAG90 are derived from different mechanical processes of the same initial product.
  • E34TEK90 rock wool cylinder with longitudinal cut density 90 kg/m3 ± 10% and thickness 10/160 mm ± 2%.

  • E34PATEK cut panel in rock wool with longitudinal cut density 90kg/m3 ± 10% and thickness 20/200 mm ± 2%.
    • E34CUTEK90 curved rock wool with longitudinal cut density 90 kg/m3 ± 10% and thickness 20/100 mm ± 2%.

    • E34SAG90 flat shape rock wool with longitudinal cut density 90 kg/m3 ± 10% and thickness 20/100 mm ± 2%.
    • Maximum organic content 3,89 %



    Field of application

    As non combustible material.

    Tests carried out
    Test as per RINA Test Laboratory report No. 2025CS011698 dated 06 June 2025 issued according to IMO 2010 FTP Code Part 1




    ATTACHMENT TO
    CERTIFICATE No. MED169825CS
    Pages 3 of 3
    The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
    XXXX/YY
    "WHEELMARK FORMAT"

    XXXX
    Notified Body number undertaking surveillance module
    YY
    Last two digits of year mark affixed
         
    ______________________________________________
    General conditions for the approval
    a) The initial conditions verified by RINA at the time of the approval are to be maintained
    b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
    c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
    d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
    e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

    f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


    __________________________________________
    Enrico Cabella
    **** NOTICE: This is NOT an official certificate ****