MED095222CS!002ENGF- -  -  N- MAXPARETE PYRO - PORTA -N- S- S- -05/04/2022- Marine Equipment- - SN- S- - N-  - 177,694B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED095222CS/002- N-Apr 4, 2027177694
 
Form
  Marine Equipment(TO)
Certification N. MED095222CS/002 - (ENG)
Certificate date 05/04/2022
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
MAXPARETE PYRO - PORTA
Applicant ODDICINI SRL
Place of requester VIA XX SETTEMBRE,186  %  28883 Gravellona Toce (VB)  % ITALY
Tel. N.,Fax, Email 0323 864144, ---, ---
Directive (EU) 2021/1158
Standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 09/03/2022
Expire date 04/04/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED095222CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type MAXPARETE PYRO - PORTA
Applicant ODDICINI SRL
VIA XX SETTEMBRE,186,28883 Gravellona Toce (VB),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
April 5, 2022
April 4, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED095222CS/002
Page 1 of 2

Product description

Single leaf hinged door whose maximum clear opening size is 900 (W) x 2120 (H) mm. The door leaf (106 mm thick) is fitted in a bulkhead representative of a folding partition system of B Class (certified B-15 Class with MED certificate No. MED095222CS/001 dated 05/04/2022) composed of panels sliding through an upper guide. The door is composed of two panels of calcium sulphyde (16 mm thick and nominal density 1150 kg/m3) type Knauf Integral. The door thickness may be increased up to 190 mm by means of further calcium sulphyde slabs, having maximum thickness of 42 mm, fitted inside the door. Inside the leaf lead sheets (0.5 mm thick) and a structural frame composed of lateral steel tubulars (dimension 40x25x2 mm) with three aluminium transversal coated stiffeners (upper, medium and lower), fitted by means of steel hooks and glue type Protopur AE100, are fitted. PVC gaskets, felt gaskets and perimeter thermo-expanding strips are also fitted.
Field of application
Fire resistant B-15 Class single leaf hinged door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.

Reference documents
Oddicini Industrie SpA drawing No. 9339-00 Rev.1 dated 07 September 2009 approved on 9 October 2009 with endorsement No. LABS-357.
Tests carried out
Test as per RINA Test Laboratory report No. 2009CS01547 issued on 20/03/2009 according to IMO Res. A. 754(18) and IMO MSC.1/Circ. 1273 dated 30 May 2008 which incorporates the provisions of the IMO MSC.1/Circ. 1319 dated 11 June 2009.




ATTACHMENT TO
CERTIFICATE No. MED095222CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****