DIP347524XTBILB- -  -  N- STEEL DOOR -N- S- S- -01/07/2025- Prodotti per nautica diporto- - NN- N- - N-  - 93,711BbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP347524XT- N-Jul 1, 202893711
 
Form
  Prodotti per nautica diporto(TO)
DIP347524XT
Certification N. DIP347524XT - (BIL)
Certificate date 01/07/2025
Product Porta stagna

Model or Denomin.
Items
STEEL DOOR
Applicant SAHINLER DENIZCILIK YATCILIK SAN. VE TIC. LTD.STI.
Place of requester ORHANLI MAH., TURGUT REIS SANAYI SITESI,B4 BLK,NO.6-7 Tuzla  % TÜRKIYE
Tel. N.,Fax, Email +90 216 377 6060, +90 216 377 6033, csahin@sahinlerdenizcilik.com
Directive NONE
Standards Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts
Expire date 01/07/2028
Head Office ISTANBUL
CERTIFICATO DI OMOLOGAZIONE BIL
Vuoto Querysave
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATEN. DIP347524XT
Si certifica che il seguente prodotto soddisfa le prescrizioni delle norme RINA per l'omologazione di tipo.
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Descrizione Porta stagna
Description Watertight door
Tipo STEEL DOOR
Type
Norme di riferimento Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts
Reference standards Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts








_________________________________
RINA Services S.p.A.
  
Alper Tek
       
Rilasciato a ISTANBUL l' 1  Luglio  2025.  Questo Certificato è valido fino al 1 Luglio 2028
   
Issued in ISTANBUL  on July 1, 2025. This Certificate is valid until July 1, 2028
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATE
DIP347524XT
Allegato - Pagina 1/1
Enclosure - Page 1 of 1
STEEL DOOR
Reference documents:

- Job nr. 2024/XT/01/3475


Product Description:
- Watertight doors clear opening: 450 mm x 1000 mm; 900 mm x 2000 mm.
- See drawings approved on 17 April 2025 with numbers ISDP-34947 and ISDP-34950.
- If the same construction materials, as per approved a.m. drawing, will be used, the T.A. may be considered suitable for all the dimensions so that: short side between 450 and 900 mm and long side between 1000 and 2000 mm.
- Doors suitable for a hydraulic pressure of 3.6 m head.
- When located in houseside, the doors are to be hinged at the forward edge.
- After installation on board, a water jet test is to be carried out.
- The type approval is relevant only to "watertightness".
- Door suitable for yachts designed for commercial use having GT less than 500 and fitted other than the engine room and galley boundaries.
- Door suitable for pleasure yachts having any GT and fitted other than the engine room and galley boundaries.
- Door suitable for pleasure yachts having GT equal to or less than 300.
- In accordance with RINA rules, a test certificate is to be issued for each door.

- Upon satisfactory completion, a certificate of conformity to the prototype has to be issued

and signed by a responsible person within the organization.


Fields of application:
- Watertight door


 01.07.2025 
 Istanbul
**** NOTICE: This is NOT an official certificate ****