FAB047324PUENG- -  -  N- Austenitic stainless steel RINA grade 304(L),316(L) or equivalent steel according to recognized standards -N- S- S- -21/03/2024- Fabbricanti Approvati- - NN- N- - S-  - 59,388BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB047324PU- N-Mar 15, 202959388
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB047324PU - (ENG)
Certificate date 21/03/2024
Type Approvazione di fabbricanti di materiali
Product Tubi in acciaio senza saldatura

Model or Denomin.
Items
Austenitic stainless steel RINA grade 304(L),316(L) or equivalent steel according to recognized standards
Applicant SEAH CHANGWON INTEGRATED SPECIAL STEEL CORPORATION
Place of requester 147, Jeokhyeon-ro, Seongsan-gu  %  51708 Changwon-si (Gyeongsangnam-do)  % REPUBLIC OF KOREA
Tel. N.,Fax, Email +82 55 269 6694, +82 55 269 6915, jiwon.yoo@seah.co.kr
Standards RINA Rules for the approval of manufacturers of materials
Expire date 15/03/2029
Head Office RINA Korea Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB047324PU
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Seamless steel pipes and tubes
Type Austenitic stainless steel RINA grade 304(L)
316(L) or equivalent steel according to recognized standards

Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until March 15, 2029
_________________________________
RINA Services S.p.A.
Jin Ho Park
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB047324PU
Enclosure - Page 1 of 1
Austenitic stainless steel RINA grade 304(L),316(L) or equivalent steel according to recognized standards

APPROVAL CONDITIONS




Size range: Outside diameter: max. 273.1 mm
Wall Thickness: 23.02 mm


Manufacturing process : Cold Drawn or Cold Rolled

Heat treatment : Solution annealing

*)Remarks : Including low temperature service.

Survey conditions:
The pipes are to be in compliance in all respects with the requirements specified in Part D Ch 2 Sec2 of the RINA Rules and are to be tested accordingly.




Renewal/Revision
28/03/2019: renewal certificate. Certificate No. FAB009619PU
22/03/2024: renewed without change. New certificate revokes previous certificate


General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA Korea Marine 

March 22, 2024
**** NOTICE: This is NOT an official certificate ****