MED481524WSENGF- -  -  N- FFH49W -N- S- S- -13/02/2025- Marine Equipment- - SN- S- - N-  - 201,826B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED481524WS- N-Feb 13, 2030201826
 
Form
  Marine Equipment(TO)
MED024625WS/001,MED024625WS/002,MED378825WS/001,MED215525WS/001,MED215525WS/002,
MED633725WS/001,MED239326WS/001,MED481026WS/001,MED645326WS/001
Certification N. MED481524WS - (ENG)
Certificate date 13/02/2025
Type Mezzi di salvataggio
Product Dispositivi di messa a mare per imbarcazioni di salvataggio a caduta libera
Item Nº MED/1.23

Model or Denomin.
Items
FFH49W
Applicant FASSMER-MARLAND INT'L LTD.
Place of requester No.23, Hemin Road, Cuiheng New District  %  528437 Zhongshan (Guangdong)  % CHINA
Tel. N.,Fax, Email ---,+86 18319951964, johnny@fassmer-marland.com
Directive (EU) 2024/1975
Standards IMO Res. MSC 81(70) as amended
Reference Documents Reg. III/4, III/16, III/23, III/33, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC Code) 8 - IMO Res. MSC.48(66) (LSA Code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8. IMO MSC.1/Circ.1632
Expire date 13/02/2030
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED481524WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.23
Description Launching appliances for free-fall lifeboats
Type FFH49W
Applicant FASSMER-MARLAND INT'L LTD.
No.23, Hemin Road, Cuiheng New District,528437 Zhongshan (Guangdong),CHINA
Testing standards IMO Res. MSC 81(70) as amended
Reference standards Reg. III/4, III/16, III/23, III/33, III/34 and Reg. X/3 of SOLAS 74 Convention as amended - IMO Res. MSC.36(63) (1994 HSC Code) 8 - IMO Res. MSC.48(66) (LSA Code) I, VI - IMO Res. MSC.97(73) (2000 HSC Code) 8. IMO MSC.1/Circ.1632
Issued in SHANGHAI on
This Certificate is valid until
February 14, 2025
February 13, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED481524WS
Page 1 of 2
TECHNICAL DATA
Product Description:
- Launching appliance for free-fall lifeboat
- Length of ramp: 6491 mm
- Breadth (inner): 2330 mm
- Maximum Working Load: 58 kN
- Maximum Hoisting Load: 42 kN
- Minimum Working Load: 25 kN
- Angle of ramp: 35 degrees
- Secondary means of launching:
Hydraulic winch type XHSJ60-396-00
Steel wire with diameter of 22 mm
- Limitations on the acceptance or use of the product
Trim up to 10 degrees and list up to 20 degrees;
Trim up to 2 degrees and list up to 5 degrees for the secondary means of launching the lifeboat
- Arrangement/positioning of launching appliance on board of ship shall be in compliance with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).
- Reference is to be made to approved drawing SHST-54137 and relevant test report.
REFERENCE DOCUMENTS

Dwg. no. Title

SHST-54137 FFW49W Free-fall Lifeboat Davit


TESTS CARRIED OUT
Tests have been carried out on 6/January/2025.




ATTACHMENT TO
CERTIFICATE No. MED481524WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****