MED463821CS!001ENG- -  -  N- PORTA A60 IN AISI316 MODELLO ASF6 -N- S- S- -27/04/2022- Marine Equipment- - SN- S- - N-  - 220,807B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED463821CS/001- N-Apr 26, 2027220807
 
Form
  Marine Equipment(TO)
Certification N. MED463821CS/001 - (ENG)
Certificate date 27/04/2022
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
PORTA A60 IN AISI316 MODELLO ASF6
Applicant CALISTRI GIACINTO S.R.L. - Calistri Giacinto S.r.L.
Place of requester VIA DEL REDOLONE, 57/A - 44 - 80A - 57  %  51034 Serravalle Pistoiese (PT)  % ITALY
Tel. N.,Fax, Email 0573 527023, 0573 520298, ---
Directive (EU) 2021/1158
Standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 19/11/2021
Expire date 26/04/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED463821CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type PORTA A60 IN AISI316 MODELLO ASF6
Applicant CALISTRI GIACINTO S.R.L. - Calistri Giacinto S.r.L.
VIA DEL REDOLONE, 57/A - 44 - 80A - 57,51034 Serravalle Pistoiese (PT),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
April 27, 2022
April 26, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED463821CS/001
Page 1 of 2

Product description

Single leaf hinged door whose clear opening size is 750 mm wide and 1950 mm high. The leaf is composed, moving from the exposed side to the fire, of a steel plate 4 mm thick, an insulating material composed of one layer of non-combustible material type MICROTHERM OVERSTITCHED SGMix 10 mm thick and density of 220 kg/m3, fitted on the steel plate 4 mm thick and fixed with aluminium tape on all the edges, an empty space and an insulating material compound composed of three layers of non-combustible material type MICROTHERM OVERSTITCHED SGMix 10 mm thick and density of 220 kg/m3 fitted on the steel plate 4 mm thick positioning on the side not exposed to the fire and fixed with aluminium tape on all the edges.
The leaf is provided with one longitudinal central steel stiffener and seven transversal steel stiffeners, having dimensions of 40x10 mm welded to the steel flat plate not exposed to the fire. The leaf frame is composed of a steel profile 5 mm thick fixed to the bulkhead by means of 72 M8 steel bolts with pitch 80 mm. On the bended edge of the rabbet from leaf and frame is fitted a thermo-expanding tape type MARVON having dimensions of 20x2 mm. The leaf is equipped with a wedge closing system act by means of one central handle.

Field of application
Fire resistant A-60 Class single leaf hinged door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame design

Reference documents
Calistri Giacinto & C drawing No. AFS6WLTS19500750BCC457VOVXXXXXXXXXS0 rev. 0 dated 8 November 2021 enclosed to Test Report N. 2021CS014638/1 dated 26 April 2022.

Tests carried out
Test as per RINA Test Laboratory report No. 2021CS014638/1 issued on 26 April 2022 according to IMO 2010 FTP Code..




ATTACHMENT TO
CERTIFICATE No. MED463821CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****