Reference documents:
- Job nr. 2024/XT/01/3275
Product Description:
- The type approval is relevant only to "watertightness".
- See drawings approved with nr. from ISDP-34437.
- Watertight hatches: 500x500 mm; 700x700 mm.
- If the same construction materials, as per approved a.m. drawings, will be used, the T.A. may be considered suitable for all the dimensions between 500 mm and 700 mm.
- The hatches are to be hinged at the forward edge.
- After installation on board, a water jet test is to be carried out.
- Hatches suitable for an hydraulic pressure of 3.0 m head.
- Hatches fitted on escape ways are to be operable by both sides (handles are to be permanently fixed).
- Hatches suitable for yachts designed for Commercial use having GT < 500 and fitted other than the engine room and galley boundaries.
- Hatches suitable for pleasure yachts having any GT and fitted other than the engine room and galley boundaries.
- Hatches suitable for pleasure yachts having GT<= 300.
Fields of application:
- Watertight hatches for "RINA Rules for the Classification of Yachts designed for Commercial Use" and "RINA Rules for the Classification of Pleasure Yachts".