MED094522CS!002ENGF- -  -  N- PORTA TAGLIAFUOCO STAGNA 1970 x 650 -N- S- S- -28/03/2022- Marine Equipment- - SN- S- - N-  - 220,807B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED094522CS/002- N-Mar 27, 2027220807
 
Form
  Marine Equipment(TO)
MED055925Y2
Certification N. MED094522CS/002 - (ENG)
Certificate date 28/03/2022
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16

Model or Denomin.
Items
PORTA TAGLIAFUOCO STAGNA 1970 x 650
Applicant CALISTRI GIACINTO S.R.L. - Calistri Giacinto S.r.L.
Place of requester VIA DEL REDOLONE, 57/A - 44 - 80A - 57  %  51034 Serravalle Pistoiese (PT)  % ITALY
Tel. N.,Fax, Email 0573 527023, 0573 520298, ---
Directive (EU) 2021/1158
Standards IMO Res. MSC.61(67)-(FTP Code) Annex 1 Part 3, IMO MSC/Circ.1120, IMO MSC/Circ. 1273
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 10/03/2022
Expire date 27/03/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED094522CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.16
Description Fire doors
Type PORTA TAGLIAFUOCO STAGNA 1970 x 650
Applicant CALISTRI GIACINTO S.R.L. - Calistri Giacinto S.r.L.
VIA DEL REDOLONE, 57/A - 44 - 80A - 57,51034 Serravalle Pistoiese (PT),ITALY
Testing standards IMO Res. MSC.61(67)-(FTP Code) Annex 1 Part 3, IMO MSC/Circ.1120, IMO MSC/Circ. 1273
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
March 28, 2022
March 27, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED094522CS/002
Page 1 of 2

Product description

Single leaf hinged door whose maximum clear opening size is 650 mm wide and 1970 mm high. The leaf, having maximum dimensions of 686 mm x 2006 mm and 122 mm thick, is composed, moving from the hinged side, of a steel plate 4 mm thick and an insulating material compound composed of two layers of non-combustible material type Microtherm Overstiched Panel 10 mm thick each and having a density of 240 kg/m3 fitted on the steel plate 4 mm thick and fixed with Zircoflex tape on all the edges. The insulating material is reduced to only one layer, 10 mm thick, in the handle housing. Moving to the side opposite to the hinges there is an empty space and an insulating material compound composed of one layer of non-combustible material type Microtherm Overstiched Panel 10 mm thick fitted on the steel plate 3 mm thick and fixed with Zircoflex tape on all the edges. The leaf is provided with 5 steel crossed stiffeners having dimensions of 10x20 mm and welded to the steel flat plate 3 mm thick. The leaf frame is composed of a steel profile 6 mm thick fixed to the bulkhead by means of 68 M8 steel bolts. The leaf closure is made tight with a gasket type EPDM fitted in the bended edge on the rabbet which is shielded with a thermo-expanding gasket type Promaseal SLK fitted on the perimetric edge frame. The leaf is equipped with a wedge closing system that acts on 6 steel poles by means of one handle.

Field of application
Fire resistant A-60 Class single leaf hinged door.

Reference documents
Calistri Giacinto & C drawing No. PS.S01.S1970x650.02 rev. 2 dated 9 January 2012 approved on 3 May 2012 with endorsement No. LABS-664.

Tests carried out
Test as per RINA Test Laboratory report No. 2012CS0145/2 issued on 3 May 2012 according to IMO Res. A. 754(18).




ATTACHMENT TO
CERTIFICATE No. MED094522CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****