MED352424CSENGF- -  -  N- FIRE RESISTANT A-60 CLASS DOOR SINGLE LEAF HINGED -N- S- S- -29/07/2024- Marine Equipment- - SN- S- - N-  - 244,549B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED352424CS- N-Dec 15, 2027244549
 
Form
  Marine Equipment(TO)
Certification N. MED352424CS - (ENG)
Certificate date 29/07/2024
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
FIRE RESISTANT A-60 CLASS DOOR SINGLE LEAF HINGED
Applicant NAVAL SUPPLIERS SRL Unipersonale
Place of requester ZONA INDUSTRIALE 24  %  33049 San Pietro Al Natisone (UD)  % ITALY
Tel. N.,Fax, Email +39 0432 727860, +39 0432 727886, firedoors@navalsuppliers.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 24/07/2024
Expire date 15/12/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED352424CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type FIRE RESISTANT A-60 CLASS DOOR SINGLE LEAF HINGED
Applicant NAVAL SUPPLIERS SRL Unipersonale
ZONA INDUSTRIALE 24,33049 San Pietro Al Natisone (UD),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
July 29, 2024
December 15, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED352424CS
Page 1 of 3

Product description

Single leaf hinged door whose maximum clear opening size is 1400 mm wide and 2400 mm high. The door leaf, having width of 1447 mm and height of 2417 mm, is composed of two carbon steel sheets, 1.2 mm thick each and, in between, the insulating material compound. Such compound is composed of a mineral wool layer type SEAROX SL 970 having thickness of 51 mm and density of 115 kg/m3 or type PAROC MARINE FIRE SLAB 120 having density of 120 kg/m3 and a layer of material named PROMAGLAF GM, 9 mm thick and having density of 150 kg/m3. The insulating materials are glued together and to the steel sheets by means of adhesive DUNAPOL AD1670. The leaf is fitted with four C shaped steel stiffeners, 1.2 mm thick and having dimensions of 60 x 20 mm welded, symmetrically to the two steel sheets, on the upper and lower part of the leaf. The frame and the counterframe are composed of two S and L shaped steel profiles having thickness of 3 mm, bolted together and to the bulkhead by means of M10 bolts, fitted with pitch ranging from 300 up to 750 mm. The door may be fitted with a self closing hose port having maximum dimensions of 160 x 188 mm.

Field of application
Fire resistant A-60 Class single leaf hinged door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- maximum door size tested;
- door used with a fire tested frame design.

The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.
Reference documents
- Naval Suppliers drawing No. FT_PA6SN_121108_R00 dated 8 November 2012 approved on 13 November 2012 with endorsement No. LABS-729;
- Naval Suppliers drawing No. VAR_A60S_3 dated 14 February 2014 approved on 31 March 2014 with endorsement No. LABS-896;
- Naval Suppliers drawing No. VAR-A60S-006 dated 10 July 2024 enclosed to the job No. 2024CS013524.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2012CS013411 issued on 16 November 2012 according to IMO Res. A. 754(18) and to IMO MSC.1/Circ. 1319 dated 11 June 2009.




ATTACHMENT TO
CERTIFICATE No. MED352424CS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****