MED024823XPENG- -  -  N- FireBuddy 2020 -N- S- S- -22/02/2024- Marine Equipment- - SN- S- - N-  - 0B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED024823XP- N-Feb 21, 20290
 
Form
  Marine Equipment(TO)
Certification N. MED024823XP - (ENG)
Certificate date 22/02/2024
Type Protezione antincendio
Product Fire-fighter's outfit: protective clothing (close proximity clothing): (a) Protective non reflective clothing for fire fighting
Item Nº MED/3.3a

Model or Denomin.
Items
FireBuddy 2020
Applicant P G PRODUCTS LTD
Place of requester 1 FOLGATE ROAD LYNGATE INDUSTRIAL ESTATE NORFOLK  %  NR28 0AJ North Walsham  % UNITED KINGDOM
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2023/1667
Standards EN 469:2020
Reference Documents Reg. II-2/10 of SOLAS '74 as amended, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7, IMO Res. MSC.98(73)-(FSS Code) 3
Expire date 21/02/2029
Responsible Office Gdańsk
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Daria Orzech S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED024823XP

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.3a
Description Fire-fighter's outfit: protective clothing (close proximity clothing): (a) Protective non reflective clothing for fire fighting
Type FireBuddy 2020
Applicant P G PRODUCTS LTD
1 FOLGATE ROAD LYNGATE INDUSTRIAL ESTATE NORFOLK,NR28 0AJ North Walsham,UNITED KINGDOM
Testing standards EN 469:2020
Reference standards Reg. II-2/10 of SOLAS '74 as amended, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7, IMO Res. MSC.98(73)-(FSS Code) 3
Issued in Gdańsk on
This Certificate is valid until
February 22, 2024
February 21, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Anna Maria Baranska
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED024823XP
Page 1 of 2
Place of manufacture
Rainwear PVT Ltd.
Rainwear Factory BLDG,

Biyagama RD, EPZ, Malwana, Sri Lanka


Product Description
The suit consists of a lightweight jacket and trousers that are worn together.
The construction of the suit has 3 layers.
- Aramid outer shell
- Meta-Aramid felt.
- Meta-Aramid/Viscose quilted lining.
Colour: Red,other colours optional.
Sizes: small, medium, large, extra large double extra large.

Application
Approved as personal protective equipment for fire-fighter's outfit complying with the provisions of the Fire Safety Systems Code. The two-piece garment composed by a jacket and trousers, both must be worn together and must be used in combination with MED approved boots, gloves and helmet together to provide the required protection.
Number of protective suits and use on board ships to comply with SOLAS Convention including amendments to the satisfaction of the Administration.
Use and restrictions according to manufacturer's instructions.
Each protective clothing is to be supplied with its instructions for use, storing, care and maintenance instructions. These instructions are to be kept on board.

Reference Documents
- Technical file issue by P G Products Ltd filled by RINA with No. PLFP/2806,
- Risk assessment dated 14/07/2023 issue by P G Products Ltd filled by RINA with No. PLFP/2805,
- EC Declaration of Conformity issue by P G Products Ltd filled by RINA with No. PLFP/2804.

Test Report
Test reports No. E-024381 issued on 26/04/2022 by BTTG filed by RINA with No. PLFP/2804.
Test reports No. E-033423 issued on 04/01/2024 by BTTG filed by RINA with No. PLFP/2804.
Test reports No. E-028473 issued on 16/12/2022 by BTTG filed by RINA with No. PLFP/2804.
Test reports No. E-031765 issued on 04/09/2023 by BTTG filed by RINA with No. PLFP/2804.

The suit FireBuddy 2020 meets requirements: Xf2, XR2, Y2 and Z2.




ATTACHMENT TO
CERTIFICATE No. MED024823XP
Pages 3 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Anna Maria Baranska
**** NOTICE: This is NOT an official certificate ****