FAB067224PUENG- -  -  N- Carbon and carbon manganese steel pipes for pressure systems -N- S- S- -15/04/2024- Fabbricanti Approvati- - NN- N- - S-  - 1,064,858BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB067224PU- N-Apr 7, 20291064858
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB067224PU - (ENG)
Certificate date 15/04/2024
Type Approvazione di fabbricanti di materiali
Product Tubi in acciaio saldati

Model or Denomin.
Items
Carbon and carbon manganese steel pipes for pressure systems
Applicant SEAH STEEL CORPORATION - SEAH STEEL CORP. POHANG PLANT
Place of requester 136, Goedong-ro, Nam-gu,  %  37862 Pohang-si (Gyeongsangbuk-do)  % REPUBLIC OF KOREA
Tel. N.,Fax, Email +82 54 271 4240, ---, seungyun.lee@seah.co.kr
Standards RINA Rules for the approval of manufacturers of materials
Expire date 07/04/2029
Head Office BUSAN
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB067224PU
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Welded steel pipes
Type Carbon and carbon manganese steel pipes for pressure systems
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until April 7, 2029
_________________________________
RINA Services S.p.A.
Il Su Baek
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB067224PU
Enclosure - Page 1 of 1
Carbon and carbon manganese steel pipes for pressure systems

APPROVAL CONDITIONS

Size range:
Outside diameter: max. 610 mm / Wall Thickness: max. 19 mm (ERW)
Outside diameter: max. 1,376.1 mm / Wall Thickness: max. 25.4 mm (SAW)

Manufacturing process: ERW- SAW

Heat treatment: normalizing by DOOWON Metal

Non destructive examination of welded seam: ultrasonic, radiographic test, eddy current test.

Survey conditions: the pipes are to be in compliance in all respects with the requirements specified in Part D Ch 2 Sec2 of the RINA Rules and are to be tested accordingly.




General conditions for the approval
  • The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
  • RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.


BUSAN 04/15/2024
**** NOTICE: This is NOT an official certificate ****