Silicone based sealant.
Dry mass per area (g/m2) 610 ± 80
Wet mass per area (g/m2) 630 ± 80
Dry thickness (mm) 0.5 ± 0.07
Wet thickness (mm) 0.5 ± 0.07
Colour: dark grey or lighter.
Field of application
As finishing material for all exposed interior and concealed or inaccessible surfaces (decorative veneer).
The product may be applied to any metallic support having a thickness ³ 2.25 mm.
On the basis of the value of the total heat release (Qt) and on the basis of the value of the peak heat release (qp) the material is deemed not generating excessive quantities of smoke nor toxic products in fire according to Annex 2 IMO 2010 FTP Code.
In case of use on surfaces and linings as specified in paragraph 3.2.1 of SOLAS 1974 Chapter II-2 Reg. 5, where the calorific value shall not exceed 45 MJ/m2 for the thickness used as required in paragraph 3.2.2, the use of the certified product must be evaluated.
Tests carried out
Test as per RINA Test Laboratory Report No. 2024CS014680/3 dated 28 November 2024 issued according to:
- IMO 2010 FTP Code Part 5.