Product Description
• Stern tube sensor type MBT 5722 (up to 200°C media temperature with Pt 100 resistance element)
• Temperature sensor and temperature transmitter type MBT 5410 (temperature range from -50 to +70°C
• Marine bearing temperature sensor type MBT 5310 with plug directly mounted on the top of the sensor, bayonet connection for monitoring of bearing temperatures where there is risk of overheating,
such as: Wind turbines, engines and generators
• Marine bearing temperature sensor type MBT 5310 with cable (wire or plug).
The cable gland is mounted in a connection plug, which is mounted in the engine wall, so that the sensor can be taken out through the engine wall and that the cable can go through the engine wall as well.
- Based on Pt 100 / Pt 1000 technology for use up to 200°C.
- Spring loaded to ensure good contact with the bearing and insertion length adjustable from 60 to 300 mm
• Universal temperature sensor with interchangeable insert and bayonet connector, type MBT 5250, MBT 5260 (up to +200°C media temperatures)
• Temperature sensor with interchangeable insert type MBT 5252 (up to +400°C media temperatures)
• Temperature sensor cable mounted type MBT 5253 (temperature range: -50°C to 200°C)
Reference Documents:
• Danfoss Data Sheet: MBT 5722, AI202086427489en-000801, dated 2021.02;
• Danfoss Data Sheet: MBT 5410, AI202186432661en-000801, dated 2021.02;
• Danfoss Data Sheet: MBT 5250, MBT 5260, MBT 5252, AI208386431879en-000801, dated 2021.02;
• Danfoss Data Sheet: MBT 5310, AI201986427607en-000501, dated 2021.02;
• Danfoss Data Sheet: MBT 5253, AI202586427279en-000701, dated 2021.03.
Test Reports:
• Danfoss Test Report No.:2008-2142, dated 2008-03-11
• DELTA Test Report Task reference T204302, Cold Test, Damp Heat Cyclic Test, Shock Test (The vibration test of task reference T204302 is not valid because of wrong parameters. 0,7g instead of 4g)
• DELTA Test Report Task reference T205006, Vibration Test, dated 2013-03-15 (The renewed vibration test of task reference T204302)
• FORCE Test Report No.: 117-34687-2, dated 2020-04-01 filed by RINA with n° PLEL/571.
Following inserts for temperature are to be used:
• MBT 150 for sensors type MBT 5250
• MBT 152 for sensors type MBT 5252
• MBT 153 for sensors type MBT 5253
• Fixed insert for MBT 5260
This certificate replaces the previous certificate ELE123820XP.