MED208723CSENGD- -  -  N- ASTRA 4" (BAS1) -N- S- S- -20/06/2024- Marine Equipment- - SN- S- - N-  - 21,567B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED208723CS- N-Jun 19, 202921567
 
Form
  Marine Equipment(TO)
MED071725GE/008
Certification N. MED208723CS - (ENG)
Certificate date 20/06/2024
Type Apparecchi di navigazione
Product Magnetic compass Class B for lifeboats and rescue boats
Item Nº MED/4.23

Model or Denomin.
Items
ASTRA 4" (BAS1)
Applicant RIVIERA SOCIETA' A RESPONSABILITA' LIMITATA GENOVA
Place of requester VIA INFERIORE RIO MAGGIORE 4 A  %  16138 Genova (GE)  % ITALY
Tel. N.,Fax, Email 0108355286, 0108356309, INFO@RIVIERAGENOVA.IT
Directive (EU) 2023/1667
Standards ISO 1069:1973, ISO 25862:2019, IEC 60945:2002 incl. IEC 60945 Corr. 1:2008.
Reference Documents SOLAS 74 Reg.III/34, IMO Res.MSC.48(66)-(LSA Code) IV, IMO Res.MSC.48(66)-(LSA Code) V, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.36(63)-(1994 HSC Code) 13, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO Res.MSC.97(73)-(2000 HSC Code) 13.
Request 12/05/2019
Expire date 19/06/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Davide Campora S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED208723CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Navigation Equipment requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/4.23
Description Magnetic compass Class B for lifeboats and rescue boats
Type ASTRA 4" (BAS1)
Applicant RIVIERA SOCIETA' A RESPONSABILITA' LIMITATA GENOVA
VIA INFERIORE RIO MAGGIORE 4 A,16138 Genova (GE),ITALY
Testing standards ISO 1069:1973, ISO 25862:2019, IEC 60945:2002 incl. IEC 60945 Corr. 1:2008.
Reference standards SOLAS 74 Reg.III/34, IMO Res.MSC.48(66)-(LSA Code) IV, IMO Res.MSC.48(66)-(LSA Code) V, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.36(63)-(1994 HSC Code) 13, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO Res.MSC.97(73)-(2000 HSC Code) 13.
Issued in Genoa on
This Certificate is valid until
June 20, 2024
June 19, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Giovanni Carratino
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED208723CS
Page 1 of 2
Product description
Hemispherical compass type;
Material of bowl: nylon/glass fibre;
Material of spherical bowl: polycarbonate;
Compass card: dia. 84 mm (apparent dia 100 mm);
Number of magnets: 2;
Magnetic moment: 0,270 A.m2;
Type of liquid: EXXSOL D80;
Means of illumination: blue led (12 or 24 V).
Field of application
Magnetic compass Class B to be use on board of lifeboats and rescue boats according to LSA Code.

Reference documents
Product description drawing issued by RIVIERA SOCIETA' A RESPONSABILITA' LIMITATA GENOVA and approved by RINA with n° CSST-22871.
Material description schedules filed by RINA as CSST-22870 and CSST-22879 or attached to the drawing CSST-22871.
Technical description and user's manual issued by RIVIERA SOCIETA' A RESPONSABILITA' LIMITATA GENOVA and filed by RINA with n° CSST-22872 and CSST-22873.
Declaration of conformity according Annex B of ISO 25862 issued by RIVIERA SOCIETA' A RESPONSABILITA' LIMITATA GENOVA and filed by RINA with n° CSST-22894.
Tests carried out
Test type approval report witnessed and filed by RINA with n° CSST-22869;
Damp heat test report n° 222041A-b issued by TesLab SRL and filed by RINA with n° CSST-22874;
High and Low temperature test report n° 233074A issued by TesLab SRL and filed by RINA with n° CSST-22875;
Rain and spray test report n° 22-4790306765-1-1-0-PER issued by UL INTERNATIONAL ITALIA S.r.l and filed by RINA with n°CSST-22876 and CSST-22878;
Vibration test report n° VR2208201RIOF.docx issued by Centrotecnica SRL and filed by RINA with n° CSST-22877.




ATTACHMENT TO
CERTIFICATE No. MED208723CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giovanni Carratino
**** NOTICE: This is NOT an official certificate ****