1. Production Description:
+ 150/250V shipboard control cables with following rating:
Type | Rated
Voltage (V) | Number of Core | Conductor
Cross-Section (mm2) | Max. Temp. (°C) |
CKJV, CKV80, CKJV90, CKJV82, CKJV92, CKJVR
/SA, NSA(NA), CKJPJ, CKJPJ80,
CKJPJ90, CKJPJ85, CKJPJ95, CKJPJR, CKJPF, CKJPF80, CKJPF90, CKJ85, CKJ86/SC/NSC(NC):CKJVP , CKJVP80 , CKJVP90 , CKJVP82 , CKJVP92, CKJVPR
/SA,NSA(NA)
CKJPJP, CKJPJP80, CKJPJP90, CKJPJP85, CKJPJP95, CKJPJPR,
CKJPFP, CKJPFP80, CKJPFP90, CKJPFP86, CKJPFP96, CKJPF86, CKJPF96, CKJPFR, CKJPFPR, CKJP85, CKJP86
/SC/NSC(NC) | 150/250V
| 2~37
(See
Note )
| 0.5, 0.75, 1.0,
1.5, 2.5
| 90 |
Note: “Number of Core” is selected from the following series of core number: 2, 3, 4, 5, 7, 8, 10, 12, 14, 16, 19, 24, 27, 30, 33, 37.
+Abbreviation:
CK: Shipboard control cable
J: Cross-linked Polyethylene Insulated
PJ: Cross-linked Polyolefin
PF: Thermoplastic Polyolefin
J: Cross-linked Polyethylene Insulated
V: PVC Sheath
R: Soft Conductor
P: Separated screen
+Outer Protection:
8: Copper wire Braid
9: Galvanized steel wire braided
5: Cross-linked Polyolefin outer sheath (SHF2)
6: Thermal plastic Polyolefin outer sheath (SHF1)
0: Without outer sheath
2: PVC Outer Sheath
TYPE APPROVAL CERTIFICATE |
No. ELE398424WS/002 |
Enclosure - Page 2 of 2 |
+Flammability Code:
DA: Single cable flame retardant
SA: Bunched cable flame retardant
NA(NSA): Bunched cable flame retardant, fire resistance
SC: Bunched cable flame retardant, low-smoke and halogen free
NC(NSC): Bunched cable flame retardant, fire resistance, low-smoke and halogen free
2. Reference Documents:
+ Specification of marine cables. Filed by RINA with drawing No. SHEL-22440 and SHEL-22309.
+ Test Report: “Shanghai Intelligent Service and Technology Co., Ltd” Report No.: TN23-0080E and TN23-5588E. Filed by RINA with drawing No. SHEL-22315.
+ Routine test Report and Narrative report signed by RINA Surveyor. Filed by RINA with drawing No.SHEL-22313.
+ Asbestos-free Declaration: Filed by RINA with drawing No. SHEL-22311.
+ Manufacturer's information, Filed by RINA with drawing No. SHEL-22312.
3. Notes/Remarks:
+ The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates.
+ Type Approval certifies that a representative sample of the product has been found to meet the applicable design criteria.
+ Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment. |
|