1. Product Description
+ Marine Fiber Optic cables used in communication and equipment of ships and mobile offshore platforms.
Product Series | A type | Q type | QF Type |
Product Type Detail | AICI, AIOI, AFCI, AFOI | QICI, QIOI, QFCI, QFOI | QFAI |
Conductor | Tight Buffer Fiber | PTB loose-tubes (up to 12 or 24 fibers per tube) | PTB loose-tubes (up to 24 fibers) |
Loose Tube | - | 2.5±0.1 mm PBT (Polybutylene Terephthalate) or
3.5±0.1 mm PBT (Polybutylene Terephthalate) | 3.5±0.1 mm PBT (Polybutylene Terephthalate) |
Protection | Mica tapeAramid Yarn and Waterblocking glass yarns |
Fire resistant tape (optional) |
Inner sheath | SHF1 |
Armour (optional) | Galvanized steel wire or Tinned copper wire braid,Min.85% | Galvanized steel wire or Tinned copper wire braid Min.85% | Glass Yarn around the loose tube |
Outer sheath (optional) | SHF1 or SHF2 or SHF2 MUD |
Note: + Install at: -20℃ to 60℃ + Operate at: -40℃ to 90℃
+ Properties’ suffix:
SHF1: Low Smoke, Zero Halogen, Flame retardant
SHF2 : Low Smoke , Zero Halogen, Flame retardant, Oil resistance
SHF2-MUD : Low Smoke , Zero Halogen, Flame retardant, Mud resistance
A(First letter): Fiber, tight buffered A(Third letter): Strength member of yarn Q : Fiber in loose tube
F : Bedding/Inner covering or taping I : Thermoplastic compound SHF 1 O: Tinned copper wire braid
C: Galvanized steel wire braid
2. Test standards:
+ IEC 60794-1-1-2015; IEC 60332-1-2-2015; IEC 60331-25-1999; IEC 60332-3-22-2018; IEC60754-1-2019; IEC60754-2-2019; IEC 61034-1-2019; IEC61034-2-2019. IEC 60092-360-2021.
3. Reference Documents:
+ Specification of marine cables. Filed by RINA with drawing No. SHEL-16853.
+ Manufacturer instruction. Filed by RINA with drawing No.: SHEL-16848.
+ Test Report: "China National cenre for Quality supervision and test of electrical wire and cable“ Report No.: CT19-05975-1~5. Test Report: “Shanghai Intelligent Service and Technology Co., Ltd” Report No.: TN23-5710E. Filed by RINA with drawing No. SHEL-16846.
+ Routine test Report signed by RINA Surveyor. Filed by RINA with drawing No.SHEL-17564.
+ Asbestos-free Declaration: Filed by RINA with drawing No. SHEL-16849.
4. Notes/Remarks:
+ The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates.
+ Type Approval certifies that a representative sample of the product has been found to meet the applicable design criteria.
+ Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment |
|