FAB103425VEENG- -  -  N- Rolled products and coils of aluminium alloy Grade 5083 and Grade 5456 -N- S- S- -24/06/2025- Fabbricanti Approvati- - NN- N- - S-  - 1,159,410BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB103425VE- N-Jun 23, 20301159410
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB103425VE - (ENG)
Certificate date 24/06/2025
Type Approvazione di fabbricanti di materiali
Product Lamiere in lega di alluminio

Model or Denomin.
Items
Rolled products and coils of aluminium alloy Grade 5083 and Grade 5456
Applicant NICHE FUSINA ROLLED PRODUCTS S.R.L.
Place of requester VIA DELL'ELETTRONICA 31  %  30176 Marghera (VE)  % ITALY
Tel. N.,Fax, Email 041 2917200, ---, simone.maso@fusinaproducts.com
Standards RINA Rules for the approval of manufacturers of materials
Expire date 23/06/2030
Responsible Office RINA Venice Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB103425VE
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Aluminium alloy sheets and plates
Type Rolled products and coils of aluminium alloy Grade 5083 and Grade 5456
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until June 23, 2030
_________________________________
RINA Services S.p.A.
Daniele Pilleri
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB103425VE
Enclosure - Page 1 of 1
Rolled products and coils of aluminium alloy Grade 5083 and Grade 5456

APPROVAL CONDITIONS




-Temper condition and max thickness for Grade 5083: - 0, H111 max thickness 60mm
- H128 max thickness 8 mm
-H116, H321 max thickness 60mm
-Temper condition and max thickness for Grade 5456: -H116, H321 max thickness 50mm

-The chemical composition and the mechanical properties are to be in accordance with RINA Rules requirements and/or with International recognised standard.

-The products are to be tested according to RINA Rules and/or International recognised standard.

-For Grade 5083 H128 and for all grades with thickness over 50 mm, as per above limits of approval, mechanical properties shall be in accordance with an International recognised standard.

-The assembly by welding shall be carried out by welding processes and consumables approved by RINA for the concerned grade of alloy.






General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA Venice Marine June 24, 2025
**** NOTICE: This is NOT an official certificate ****